| Message ID | 1460642696-1858-1-git-send-email-jszhang@marvell.com |
|---|---|
| State | Changes Requested |
| Headers | show |
Hi Jisheng,
[auto build test ERROR on wsa/i2c/for-next]
[also build test ERROR on v4.6-rc3 next-20160414]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
url: https://github.com/0day-ci/linux/commits/Jisheng-Zhang/i2c-designware-platdrv-implement-bus-recovery/20160414-221615
base: https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux i2c/for-next
config: xtensa-allyesconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=xtensa
All error/warnings (new ones prefixed by >>):
drivers/i2c/busses/i2c-designware-platdrv.c: In function 'i2c_dw_plat_prepare_recovery':
>> drivers/i2c/busses/i2c-designware-platdrv.c:156:2: error: implicit declaration of function 'pinctrl_select_state' [-Werror=implicit-function-declaration]
pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
^
drivers/i2c/busses/i2c-designware-platdrv.c: In function 'i2c_dw_plat_init_recovery_info':
>> drivers/i2c/busses/i2c-designware-platdrv.c:171:2: error: implicit declaration of function 'pinctrl_lookup_state' [-Werror=implicit-function-declaration]
dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl,
^
>> drivers/i2c/busses/i2c-designware-platdrv.c:172:4: error: 'PINCTRL_STATE_DEFAULT' undeclared (first use in this function)
PINCTRL_STATE_DEFAULT);
^
drivers/i2c/busses/i2c-designware-platdrv.c:172:4: note: each undeclared identifier is reported only once for each function it appears in
>> drivers/i2c/busses/i2c-designware-platdrv.c:173:25: warning: assignment makes pointer from integer without a cast
dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl,
^
drivers/i2c/busses/i2c-designware-platdrv.c: In function 'dw_i2c_plat_probe':
>> drivers/i2c/busses/i2c-designware-platdrv.c:212:2: error: implicit declaration of function 'devm_pinctrl_get' [-Werror=implicit-function-declaration]
dev->pinctrl = devm_pinctrl_get(&pdev->dev);
^
drivers/i2c/busses/i2c-designware-platdrv.c:212:15: warning: assignment makes pointer from integer without a cast
dev->pinctrl = devm_pinctrl_get(&pdev->dev);
^
cc1: some warnings being treated as errors
vim +/pinctrl_select_state +156 drivers/i2c/busses/i2c-designware-platdrv.c
150 }
151
152 static void i2c_dw_plat_prepare_recovery(struct i2c_adapter *adap)
153 {
154 struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
155
> 156 pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
157 }
158
159 static void i2c_dw_plat_unprepare_recovery(struct i2c_adapter *adap)
160 {
161 struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
162
163 pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
164 }
165
166 static void i2c_dw_plat_init_recovery_info(struct dw_i2c_dev *dev,
167 struct platform_device *pdev)
168 {
169 struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
170
> 171 dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl,
> 172 PINCTRL_STATE_DEFAULT);
> 173 dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl,
174 "gpio");
175 rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0);
176 rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0);
177
178 if (!gpio_is_valid(rinfo->sda_gpio) ||
179 !gpio_is_valid(rinfo->scl_gpio) ||
180 IS_ERR(dev->pinctrl_pins_default) ||
181 IS_ERR(dev->pinctrl_pins_gpio)) {
182 dev_dbg(&pdev->dev, "recovery information incomplete\n");
183 return;
184 }
185
186 dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n",
187 rinfo->sda_gpio, rinfo->scl_gpio);
188
189 rinfo->prepare_recovery = i2c_dw_plat_prepare_recovery;
190 rinfo->unprepare_recovery = i2c_dw_plat_unprepare_recovery;
191 rinfo->recover_bus = i2c_generic_gpio_recovery;
192 dev->adapter.bus_recovery_info = rinfo;
193 }
194
195 static int dw_i2c_plat_probe(struct platform_device *pdev)
196 {
197 struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
198 struct dw_i2c_dev *dev;
199 struct i2c_adapter *adap;
200 struct resource *mem;
201 int irq, r;
202 u32 clk_freq, ht = 0;
203
204 irq = platform_get_irq(pdev, 0);
205 if (irq < 0)
206 return irq;
207
208 dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
209 if (!dev)
210 return -ENOMEM;
211
> 212 dev->pinctrl = devm_pinctrl_get(&pdev->dev);
213 if (IS_ERR(dev->pinctrl))
214 return PTR_ERR(dev->pinctrl);
215
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
On Thu, Apr 14, 2016 at 10:04:56PM +0800, Jisheng Zhang wrote: > Implement bus recovery methods for i2c designware so we can recover > from situations where SCL/SDA are stuck low. > > The recovery method is similar as i2c-imx: "config the i2c pinctrl to > gpio mode by calling pinctrl sleep set function, and then use GPIO to > emulate the i2c protocol to send nine dummy clock to recover i2c > device. After recovery, set i2c pinctrl to default group setting. > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> > --- > depends on runtime pm patches > http://lists.infradead.org/pipermail/linux-arm-kernel/2016-April/422202.html > .../devicetree/bindings/i2c/i2c-designware.txt | 12 ++++++ > drivers/i2c/busses/i2c-designware-core.c | 6 ++- > drivers/i2c/busses/i2c-designware-core.h | 4 ++ > drivers/i2c/busses/i2c-designware-platdrv.c | 50 ++++++++++++++++++++++ > 4 files changed, 71 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt > index fee26dc..51a55c6 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt > +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt > @@ -20,6 +20,13 @@ Optional properties : > - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds. > This value which is by default 300ns is used to compute the tHIGH period. > > + - scl-gpios: specify the gpio related to SCL pin > + > + - sda-gpios: specify the gpio related to SDA pin > + > + - pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c > + bus recovery, call it "gpio" state > + > Example : > > i2c@f0000 { > @@ -42,4 +49,9 @@ Example : > i2c-sda-hold-time-ns = <300>; > i2c-sda-falling-time-ns = <300>; > i2c-scl-falling-time-ns = <300>; > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c1_default>; > + pinctrl-1 = <&pinctrl_i2c1_gpio>; > + scl-gpios = <&porta 26 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&porta 27 GPIO_ACTIVE_HIGH>; > }; > diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c > index 4255eaa..be40de1 100644 > --- a/drivers/i2c/busses/i2c-designware-core.c > +++ b/drivers/i2c/busses/i2c-designware-core.c > @@ -399,7 +399,10 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) > while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { > if (timeout <= 0) { > dev_warn(dev->dev, "timeout waiting for bus ready\n"); > - return -ETIMEDOUT; > + i2c_recover_bus(&dev->adapter); > + if (dw_readl(dev, DW_IC_STATUS) > + & DW_IC_STATUS_ACTIVITY) > + return -ETIMEDOUT; > } > timeout--; > usleep_range(1000, 1100); > @@ -665,6 +668,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > /* wait for tx to complete */ > if (!wait_for_completion_timeout(&dev->cmd_complete, HZ)) { > dev_err(dev->dev, "controller timed out\n"); > + i2c_recover_bus(&dev->adapter); > /* i2c_dw_init implicitly disables the adapter */ > i2c_dw_init(dev); > ret = -ETIMEDOUT; > diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h > index cd409e7..26c84ee 100644 > --- a/drivers/i2c/busses/i2c-designware-core.h > +++ b/drivers/i2c/busses/i2c-designware-core.h > @@ -104,6 +104,10 @@ struct dw_i2c_dev { > u16 fs_lcnt; > int (*acquire_lock)(struct dw_i2c_dev *dev); > void (*release_lock)(struct dw_i2c_dev *dev); > + struct i2c_bus_recovery_info rinfo; > + struct pinctrl *pinctrl; > + struct pinctrl_state *pinctrl_pins_default; > + struct pinctrl_state *pinctrl_pins_gpio; > bool pm_runtime_disabled; > }; > > diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c > index 1488cea..62bded9 100644 > --- a/drivers/i2c/busses/i2c-designware-platdrv.c > +++ b/drivers/i2c/busses/i2c-designware-platdrv.c > @@ -33,6 +33,7 @@ > #include <linux/err.h> > #include <linux/interrupt.h> > #include <linux/of.h> > +#include <linux/of_gpio.h> > #include <linux/platform_device.h> > #include <linux/pm.h> > #include <linux/pm_runtime.h> > @@ -148,6 +149,49 @@ static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare) > return 0; > } > > +static void i2c_dw_plat_prepare_recovery(struct i2c_adapter *adap) > +{ > + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); > + > + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio); > +} > + > +static void i2c_dw_plat_unprepare_recovery(struct i2c_adapter *adap) > +{ > + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); > + > + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default); > +} > + > +static void i2c_dw_plat_init_recovery_info(struct dw_i2c_dev *dev, > + struct platform_device *pdev) > +{ > + struct i2c_bus_recovery_info *rinfo = &dev->rinfo; > + > + dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl, > + PINCTRL_STATE_DEFAULT); > + dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl, > + "gpio"); > + rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0); > + rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0); > + > + if (!gpio_is_valid(rinfo->sda_gpio) || > + !gpio_is_valid(rinfo->scl_gpio) || > + IS_ERR(dev->pinctrl_pins_default) || > + IS_ERR(dev->pinctrl_pins_gpio)) { > + dev_dbg(&pdev->dev, "recovery information incomplete\n"); > + return; > + } > + > + dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n", > + rinfo->sda_gpio, rinfo->scl_gpio); > + > + rinfo->prepare_recovery = i2c_dw_plat_prepare_recovery; > + rinfo->unprepare_recovery = i2c_dw_plat_unprepare_recovery; > + rinfo->recover_bus = i2c_generic_gpio_recovery; This whole thing is DT specific and I don't see how we can do the same for ACPI. Should it be enabled only when the controller was enumerated from DT? > + dev->adapter.bus_recovery_info = rinfo; > +} > + > static int dw_i2c_plat_probe(struct platform_device *pdev) > { > struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev); > @@ -165,6 +209,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) > if (!dev) > return -ENOMEM; > > + dev->pinctrl = devm_pinctrl_get(&pdev->dev); > + if (IS_ERR(dev->pinctrl)) > + return PTR_ERR(dev->pinctrl); > + > + i2c_dw_plat_init_recovery_info(dev, pdev); > + > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > dev->base = devm_ioremap_resource(&pdev->dev, mem); > if (IS_ERR(dev->base)) > -- > 2.8.0.rc3 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Apr 14, 2016 at 10:39 PM, Mika Westerberg <mika.westerberg@linux.intel.com> wrote: > On Thu, Apr 14, 2016 at 10:04:56PM +0800, Jisheng Zhang wrote: >> Implement bus recovery methods for i2c designware so we can recover >> from situations where SCL/SDA are stuck low. >> >> The recovery method is similar as i2c-imx: "config the i2c pinctrl to >> gpio mode by calling pinctrl sleep set function, and then use GPIO to >> emulate the i2c protocol to send nine dummy clock to recover i2c >> device. After recovery, set i2c pinctrl to default group setting. >> >> Signed-off-by: Jisheng Zhang <jszhang@marvell.com> >> --- >> depends on runtime pm patches >> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-April/422202.html >> .../devicetree/bindings/i2c/i2c-designware.txt | 12 ++++++ >> drivers/i2c/busses/i2c-designware-core.c | 6 ++- >> drivers/i2c/busses/i2c-designware-core.h | 4 ++ >> drivers/i2c/busses/i2c-designware-platdrv.c | 50 ++++++++++++++++++++++ >> 4 files changed, 71 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt >> index fee26dc..51a55c6 100644 >> --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt >> +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt >> @@ -20,6 +20,13 @@ Optional properties : >> - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds. >> This value which is by default 300ns is used to compute the tHIGH period. >> >> + - scl-gpios: specify the gpio related to SCL pin >> + >> + - sda-gpios: specify the gpio related to SDA pin >> + >> + - pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c >> + bus recovery, call it "gpio" state >> + >> Example : >> >> i2c@f0000 { >> @@ -42,4 +49,9 @@ Example : >> i2c-sda-hold-time-ns = <300>; >> i2c-sda-falling-time-ns = <300>; >> i2c-scl-falling-time-ns = <300>; >> + pinctrl-names = "default", "gpio"; >> + pinctrl-0 = <&pinctrl_i2c1_default>; >> + pinctrl-1 = <&pinctrl_i2c1_gpio>; >> + scl-gpios = <&porta 26 GPIO_ACTIVE_HIGH>; >> + sda-gpios = <&porta 27 GPIO_ACTIVE_HIGH>; >> }; >> diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c >> index 4255eaa..be40de1 100644 >> --- a/drivers/i2c/busses/i2c-designware-core.c >> +++ b/drivers/i2c/busses/i2c-designware-core.c >> @@ -399,7 +399,10 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) >> while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { >> if (timeout <= 0) { >> dev_warn(dev->dev, "timeout waiting for bus ready\n"); >> - return -ETIMEDOUT; >> + i2c_recover_bus(&dev->adapter); >> + if (dw_readl(dev, DW_IC_STATUS) >> + & DW_IC_STATUS_ACTIVITY) >> + return -ETIMEDOUT; >> } >> timeout--; >> usleep_range(1000, 1100); >> @@ -665,6 +668,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) >> /* wait for tx to complete */ >> if (!wait_for_completion_timeout(&dev->cmd_complete, HZ)) { >> dev_err(dev->dev, "controller timed out\n"); >> + i2c_recover_bus(&dev->adapter); >> /* i2c_dw_init implicitly disables the adapter */ >> i2c_dw_init(dev); >> ret = -ETIMEDOUT; >> diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h >> index cd409e7..26c84ee 100644 >> --- a/drivers/i2c/busses/i2c-designware-core.h >> +++ b/drivers/i2c/busses/i2c-designware-core.h >> @@ -104,6 +104,10 @@ struct dw_i2c_dev { >> u16 fs_lcnt; >> int (*acquire_lock)(struct dw_i2c_dev *dev); >> void (*release_lock)(struct dw_i2c_dev *dev); >> + struct i2c_bus_recovery_info rinfo; >> + struct pinctrl *pinctrl; >> + struct pinctrl_state *pinctrl_pins_default; >> + struct pinctrl_state *pinctrl_pins_gpio; >> bool pm_runtime_disabled; >> }; >> >> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c >> index 1488cea..62bded9 100644 >> --- a/drivers/i2c/busses/i2c-designware-platdrv.c >> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c >> @@ -33,6 +33,7 @@ >> #include <linux/err.h> >> #include <linux/interrupt.h> >> #include <linux/of.h> >> +#include <linux/of_gpio.h> >> #include <linux/platform_device.h> >> #include <linux/pm.h> >> #include <linux/pm_runtime.h> >> @@ -148,6 +149,49 @@ static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare) >> return 0; >> } >> >> +static void i2c_dw_plat_prepare_recovery(struct i2c_adapter *adap) >> +{ >> + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); >> + >> + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio); >> +} >> + >> +static void i2c_dw_plat_unprepare_recovery(struct i2c_adapter *adap) >> +{ >> + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); >> + >> + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default); >> +} >> + >> +static void i2c_dw_plat_init_recovery_info(struct dw_i2c_dev *dev, >> + struct platform_device *pdev) >> +{ >> + struct i2c_bus_recovery_info *rinfo = &dev->rinfo; >> + >> + dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl, >> + PINCTRL_STATE_DEFAULT); >> + dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl, >> + "gpio"); >> + rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0); >> + rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0); >> + >> + if (!gpio_is_valid(rinfo->sda_gpio) || >> + !gpio_is_valid(rinfo->scl_gpio) || >> + IS_ERR(dev->pinctrl_pins_default) || >> + IS_ERR(dev->pinctrl_pins_gpio)) { >> + dev_dbg(&pdev->dev, "recovery information incomplete\n"); >> + return; >> + } >> + >> + dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n", >> + rinfo->sda_gpio, rinfo->scl_gpio); >> + >> + rinfo->prepare_recovery = i2c_dw_plat_prepare_recovery; >> + rinfo->unprepare_recovery = i2c_dw_plat_unprepare_recovery; >> + rinfo->recover_bus = i2c_generic_gpio_recovery; > > This whole thing is DT specific and I don't see how we can do the same > for ACPI. Should it be enabled only when the controller was enumerated > from DT? > For ACPI, probably result in the panic-alike function calling chain at i2c_dw_init --> dev->get_clk_rate_khz(dev). Mika, I think you need to take ACPI into account while not focus on DT only KM >> + dev->adapter.bus_recovery_info = rinfo; >> +} >> + >> static int dw_i2c_plat_probe(struct platform_device *pdev) >> { >> struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev); >> @@ -165,6 +209,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) >> if (!dev) >> return -ENOMEM; >> >> + dev->pinctrl = devm_pinctrl_get(&pdev->dev); >> + if (IS_ERR(dev->pinctrl)) >> + return PTR_ERR(dev->pinctrl); >> + >> + i2c_dw_plat_init_recovery_info(dev, pdev); >> + >> mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> dev->base = devm_ioremap_resource(&pdev->dev, mem); >> if (IS_ERR(dev->base)) >> -- >> 2.8.0.rc3 > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Apr 14, 2016 at 10:04:56PM +0800, Jisheng Zhang wrote: > Implement bus recovery methods for i2c designware so we can recover > from situations where SCL/SDA are stuck low. > > The recovery method is similar as i2c-imx: "config the i2c pinctrl to > gpio mode by calling pinctrl sleep set function, and then use GPIO to > emulate the i2c protocol to send nine dummy clock to recover i2c > device. After recovery, set i2c pinctrl to default group setting. > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> > --- > depends on runtime pm patches > http://lists.infradead.org/pipermail/linux-arm-kernel/2016-April/422202.html > .../devicetree/bindings/i2c/i2c-designware.txt | 12 ++++++ > drivers/i2c/busses/i2c-designware-core.c | 6 ++- > drivers/i2c/busses/i2c-designware-core.h | 4 ++ > drivers/i2c/busses/i2c-designware-platdrv.c | 50 ++++++++++++++++++++++ > 4 files changed, 71 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt > index fee26dc..51a55c6 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt > +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt > @@ -20,6 +20,13 @@ Optional properties : > - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds. > This value which is by default 300ns is used to compute the tHIGH period. > > + - scl-gpios: specify the gpio related to SCL pin > + > + - sda-gpios: specify the gpio related to SDA pin > + > + - pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c > + bus recovery, call it "gpio" state > + Make these common properties in i2c.txt (and a separate patch). > Example : > > i2c@f0000 { > @@ -42,4 +49,9 @@ Example : > i2c-sda-hold-time-ns = <300>; > i2c-sda-falling-time-ns = <300>; > i2c-scl-falling-time-ns = <300>; > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c1_default>; > + pinctrl-1 = <&pinctrl_i2c1_gpio>; > + scl-gpios = <&porta 26 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&porta 27 GPIO_ACTIVE_HIGH>; > }; -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dear Mika, On Thu, 14 Apr 2016 17:39:16 +0300 Mika Westerberg wrote: > On Thu, Apr 14, 2016 at 10:04:56PM +0800, Jisheng Zhang wrote: > > Implement bus recovery methods for i2c designware so we can recover > > from situations where SCL/SDA are stuck low. > > > > The recovery method is similar as i2c-imx: "config the i2c pinctrl to > > gpio mode by calling pinctrl sleep set function, and then use GPIO to > > emulate the i2c protocol to send nine dummy clock to recover i2c > > device. After recovery, set i2c pinctrl to default group setting. > > > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> > > --- > > depends on runtime pm patches > > http://lists.infradead.org/pipermail/linux-arm-kernel/2016-April/422202.html > > .../devicetree/bindings/i2c/i2c-designware.txt | 12 ++++++ > > drivers/i2c/busses/i2c-designware-core.c | 6 ++- > > drivers/i2c/busses/i2c-designware-core.h | 4 ++ > > drivers/i2c/busses/i2c-designware-platdrv.c | 50 ++++++++++++++++++++++ > > 4 files changed, 71 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt > > index fee26dc..51a55c6 100644 > > --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt > > +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt > > @@ -20,6 +20,13 @@ Optional properties : > > - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds. > > This value which is by default 300ns is used to compute the tHIGH period. > > > > + - scl-gpios: specify the gpio related to SCL pin > > + > > + - sda-gpios: specify the gpio related to SDA pin > > + > > + - pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c > > + bus recovery, call it "gpio" state > > + > > Example : > > > > i2c@f0000 { > > @@ -42,4 +49,9 @@ Example : > > i2c-sda-hold-time-ns = <300>; > > i2c-sda-falling-time-ns = <300>; > > i2c-scl-falling-time-ns = <300>; > > + pinctrl-names = "default", "gpio"; > > + pinctrl-0 = <&pinctrl_i2c1_default>; > > + pinctrl-1 = <&pinctrl_i2c1_gpio>; > > + scl-gpios = <&porta 26 GPIO_ACTIVE_HIGH>; > > + sda-gpios = <&porta 27 GPIO_ACTIVE_HIGH>; > > }; > > diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c > > index 4255eaa..be40de1 100644 > > --- a/drivers/i2c/busses/i2c-designware-core.c > > +++ b/drivers/i2c/busses/i2c-designware-core.c > > @@ -399,7 +399,10 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) > > while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { > > if (timeout <= 0) { > > dev_warn(dev->dev, "timeout waiting for bus ready\n"); > > - return -ETIMEDOUT; > > + i2c_recover_bus(&dev->adapter); > > + if (dw_readl(dev, DW_IC_STATUS) > > + & DW_IC_STATUS_ACTIVITY) > > + return -ETIMEDOUT; > > } > > timeout--; > > usleep_range(1000, 1100); > > @@ -665,6 +668,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > > /* wait for tx to complete */ > > if (!wait_for_completion_timeout(&dev->cmd_complete, HZ)) { > > dev_err(dev->dev, "controller timed out\n"); > > + i2c_recover_bus(&dev->adapter); > > /* i2c_dw_init implicitly disables the adapter */ > > i2c_dw_init(dev); > > ret = -ETIMEDOUT; > > diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h > > index cd409e7..26c84ee 100644 > > --- a/drivers/i2c/busses/i2c-designware-core.h > > +++ b/drivers/i2c/busses/i2c-designware-core.h > > @@ -104,6 +104,10 @@ struct dw_i2c_dev { > > u16 fs_lcnt; > > int (*acquire_lock)(struct dw_i2c_dev *dev); > > void (*release_lock)(struct dw_i2c_dev *dev); > > + struct i2c_bus_recovery_info rinfo; > > + struct pinctrl *pinctrl; > > + struct pinctrl_state *pinctrl_pins_default; > > + struct pinctrl_state *pinctrl_pins_gpio; > > bool pm_runtime_disabled; > > }; > > > > diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c > > index 1488cea..62bded9 100644 > > --- a/drivers/i2c/busses/i2c-designware-platdrv.c > > +++ b/drivers/i2c/busses/i2c-designware-platdrv.c > > @@ -33,6 +33,7 @@ > > #include <linux/err.h> > > #include <linux/interrupt.h> > > #include <linux/of.h> > > +#include <linux/of_gpio.h> > > #include <linux/platform_device.h> > > #include <linux/pm.h> > > #include <linux/pm_runtime.h> > > @@ -148,6 +149,49 @@ static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare) > > return 0; > > } > > > > +static void i2c_dw_plat_prepare_recovery(struct i2c_adapter *adap) > > +{ > > + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); > > + > > + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio); > > +} > > + > > +static void i2c_dw_plat_unprepare_recovery(struct i2c_adapter *adap) > > +{ > > + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); > > + > > + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default); > > +} > > + > > +static void i2c_dw_plat_init_recovery_info(struct dw_i2c_dev *dev, > > + struct platform_device *pdev) > > +{ > > + struct i2c_bus_recovery_info *rinfo = &dev->rinfo; > > + > > + dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl, > > + PINCTRL_STATE_DEFAULT); > > + dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl, > > + "gpio"); > > + rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0); > > + rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0); > > + > > + if (!gpio_is_valid(rinfo->sda_gpio) || > > + !gpio_is_valid(rinfo->scl_gpio) || > > + IS_ERR(dev->pinctrl_pins_default) || > > + IS_ERR(dev->pinctrl_pins_gpio)) { > > + dev_dbg(&pdev->dev, "recovery information incomplete\n"); > > + return; For ACPI, we should return here, right? > > + } > > + > > + dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n", > > + rinfo->sda_gpio, rinfo->scl_gpio); > > + > > + rinfo->prepare_recovery = i2c_dw_plat_prepare_recovery; > > + rinfo->unprepare_recovery = i2c_dw_plat_unprepare_recovery; > > + rinfo->recover_bus = i2c_generic_gpio_recovery; > > This whole thing is DT specific and I don't see how we can do the same > for ACPI. Should it be enabled only when the controller was enumerated > from DT? Per my understanding, for ACPI, the pinctrl_pins_default, pinctrl_pins_gpio, sda_gpio and scl_gpio will be invalid or err, so we won't setup rinfo at all. However, I have no acpi platform which have i2c designware to double confirm. > > > + dev->adapter.bus_recovery_info = rinfo; > > +} > > + > > static int dw_i2c_plat_probe(struct platform_device *pdev) > > { > > struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev); > > @@ -165,6 +209,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) > > if (!dev) > > return -ENOMEM; > > > > + dev->pinctrl = devm_pinctrl_get(&pdev->dev); > > + if (IS_ERR(dev->pinctrl)) > > + return PTR_ERR(dev->pinctrl); > > + > > + i2c_dw_plat_init_recovery_info(dev, pdev); > > + > > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > dev->base = devm_ioremap_resource(&pdev->dev, mem); > > if (IS_ERR(dev->base)) > > -- > > 2.8.0.rc3 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Apr 15, 2016 at 02:08:43PM +0800, Jisheng Zhang wrote: > Dear Mika, > > On Thu, 14 Apr 2016 17:39:16 +0300 Mika Westerberg wrote: > > > On Thu, Apr 14, 2016 at 10:04:56PM +0800, Jisheng Zhang wrote: > > > Implement bus recovery methods for i2c designware so we can recover > > > from situations where SCL/SDA are stuck low. > > > > > > The recovery method is similar as i2c-imx: "config the i2c pinctrl to > > > gpio mode by calling pinctrl sleep set function, and then use GPIO to > > > emulate the i2c protocol to send nine dummy clock to recover i2c > > > device. After recovery, set i2c pinctrl to default group setting. > > > > > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> > > > --- > > > depends on runtime pm patches > > > http://lists.infradead.org/pipermail/linux-arm-kernel/2016-April/422202.html > > > .../devicetree/bindings/i2c/i2c-designware.txt | 12 ++++++ > > > drivers/i2c/busses/i2c-designware-core.c | 6 ++- > > > drivers/i2c/busses/i2c-designware-core.h | 4 ++ > > > drivers/i2c/busses/i2c-designware-platdrv.c | 50 ++++++++++++++++++++++ > > > 4 files changed, 71 insertions(+), 1 deletion(-) > > > > > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt > > > index fee26dc..51a55c6 100644 > > > --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt > > > +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt > > > @@ -20,6 +20,13 @@ Optional properties : > > > - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds. > > > This value which is by default 300ns is used to compute the tHIGH period. > > > > > > + - scl-gpios: specify the gpio related to SCL pin > > > + > > > + - sda-gpios: specify the gpio related to SDA pin > > > + > > > + - pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c > > > + bus recovery, call it "gpio" state > > > + > > > Example : > > > > > > i2c@f0000 { > > > @@ -42,4 +49,9 @@ Example : > > > i2c-sda-hold-time-ns = <300>; > > > i2c-sda-falling-time-ns = <300>; > > > i2c-scl-falling-time-ns = <300>; > > > + pinctrl-names = "default", "gpio"; > > > + pinctrl-0 = <&pinctrl_i2c1_default>; > > > + pinctrl-1 = <&pinctrl_i2c1_gpio>; > > > + scl-gpios = <&porta 26 GPIO_ACTIVE_HIGH>; > > > + sda-gpios = <&porta 27 GPIO_ACTIVE_HIGH>; > > > }; > > > diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c > > > index 4255eaa..be40de1 100644 > > > --- a/drivers/i2c/busses/i2c-designware-core.c > > > +++ b/drivers/i2c/busses/i2c-designware-core.c > > > @@ -399,7 +399,10 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) > > > while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { > > > if (timeout <= 0) { > > > dev_warn(dev->dev, "timeout waiting for bus ready\n"); > > > - return -ETIMEDOUT; > > > + i2c_recover_bus(&dev->adapter); > > > + if (dw_readl(dev, DW_IC_STATUS) > > > + & DW_IC_STATUS_ACTIVITY) > > > + return -ETIMEDOUT; > > > } > > > timeout--; > > > usleep_range(1000, 1100); > > > @@ -665,6 +668,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > > > /* wait for tx to complete */ > > > if (!wait_for_completion_timeout(&dev->cmd_complete, HZ)) { > > > dev_err(dev->dev, "controller timed out\n"); > > > + i2c_recover_bus(&dev->adapter); > > > /* i2c_dw_init implicitly disables the adapter */ > > > i2c_dw_init(dev); > > > ret = -ETIMEDOUT; > > > diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h > > > index cd409e7..26c84ee 100644 > > > --- a/drivers/i2c/busses/i2c-designware-core.h > > > +++ b/drivers/i2c/busses/i2c-designware-core.h > > > @@ -104,6 +104,10 @@ struct dw_i2c_dev { > > > u16 fs_lcnt; > > > int (*acquire_lock)(struct dw_i2c_dev *dev); > > > void (*release_lock)(struct dw_i2c_dev *dev); > > > + struct i2c_bus_recovery_info rinfo; > > > + struct pinctrl *pinctrl; > > > + struct pinctrl_state *pinctrl_pins_default; > > > + struct pinctrl_state *pinctrl_pins_gpio; > > > bool pm_runtime_disabled; > > > }; > > > > > > diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c > > > index 1488cea..62bded9 100644 > > > --- a/drivers/i2c/busses/i2c-designware-platdrv.c > > > +++ b/drivers/i2c/busses/i2c-designware-platdrv.c > > > @@ -33,6 +33,7 @@ > > > #include <linux/err.h> > > > #include <linux/interrupt.h> > > > #include <linux/of.h> > > > +#include <linux/of_gpio.h> > > > #include <linux/platform_device.h> > > > #include <linux/pm.h> > > > #include <linux/pm_runtime.h> > > > @@ -148,6 +149,49 @@ static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare) > > > return 0; > > > } > > > > > > +static void i2c_dw_plat_prepare_recovery(struct i2c_adapter *adap) > > > +{ > > > + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); > > > + > > > + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio); > > > +} > > > + > > > +static void i2c_dw_plat_unprepare_recovery(struct i2c_adapter *adap) > > > +{ > > > + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); > > > + > > > + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default); > > > +} > > > + > > > +static void i2c_dw_plat_init_recovery_info(struct dw_i2c_dev *dev, > > > + struct platform_device *pdev) > > > +{ > > > + struct i2c_bus_recovery_info *rinfo = &dev->rinfo; > > > + > > > + dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl, > > > + PINCTRL_STATE_DEFAULT); > > > + dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl, > > > + "gpio"); > > > + rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0); > > > + rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0); > > > + > > > + if (!gpio_is_valid(rinfo->sda_gpio) || > > > + !gpio_is_valid(rinfo->scl_gpio) || > > > + IS_ERR(dev->pinctrl_pins_default) || > > > + IS_ERR(dev->pinctrl_pins_gpio)) { > > > + dev_dbg(&pdev->dev, "recovery information incomplete\n"); > > > + return; > > For ACPI, we should return here, right? I hope so. And I do not want to see any useless messages about incomplete recovery information on my PC. > > > + } > > > + > > > + dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n", > > > + rinfo->sda_gpio, rinfo->scl_gpio); > > > + > > > + rinfo->prepare_recovery = i2c_dw_plat_prepare_recovery; > > > + rinfo->unprepare_recovery = i2c_dw_plat_unprepare_recovery; > > > + rinfo->recover_bus = i2c_generic_gpio_recovery; > > > > This whole thing is DT specific and I don't see how we can do the same > > for ACPI. Should it be enabled only when the controller was enumerated > > from DT? > > Per my understanding, for ACPI, the pinctrl_pins_default, pinctrl_pins_gpio, > sda_gpio and scl_gpio will be invalid or err, so we won't setup rinfo > at all. However, I have no acpi platform which have i2c designware to double > confirm. What happens to those of_get_ functions when you pass NULL of_node? If they do not crash then I suppose it is fine. Anyhow it might be good idea to do something like if (!pdev->dev.of_node) return; in the beginning of that function. > > > > > + dev->adapter.bus_recovery_info = rinfo; > > > +} > > > + > > > static int dw_i2c_plat_probe(struct platform_device *pdev) > > > { > > > struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev); > > > @@ -165,6 +209,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) > > > if (!dev) > > > return -ENOMEM; > > > > > > + dev->pinctrl = devm_pinctrl_get(&pdev->dev); > > > + if (IS_ERR(dev->pinctrl)) > > > + return PTR_ERR(dev->pinctrl); > > > + > > > + i2c_dw_plat_init_recovery_info(dev, pdev); > > > + > > > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > > dev->base = devm_ioremap_resource(&pdev->dev, mem); > > > if (IS_ERR(dev->base)) > > > -- > > > 2.8.0.rc3 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 15 Apr 2016 10:07:46 +0300 Mika Westerberg <mika.westerberg@linux.intel.com> wrote: > On Fri, Apr 15, 2016 at 02:08:43PM +0800, Jisheng Zhang wrote: > > Dear Mika, > > > > On Thu, 14 Apr 2016 17:39:16 +0300 Mika Westerberg wrote: > > > > > On Thu, Apr 14, 2016 at 10:04:56PM +0800, Jisheng Zhang wrote: > > > > Implement bus recovery methods for i2c designware so we can recover > > > > from situations where SCL/SDA are stuck low. > > > > > > > > The recovery method is similar as i2c-imx: "config the i2c pinctrl to > > > > gpio mode by calling pinctrl sleep set function, and then use GPIO to > > > > emulate the i2c protocol to send nine dummy clock to recover i2c > > > > device. After recovery, set i2c pinctrl to default group setting. > > > > > > > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> > > > > --- > > > > depends on runtime pm patches > > > > http://lists.infradead.org/pipermail/linux-arm-kernel/2016-April/422202.html > > > > .../devicetree/bindings/i2c/i2c-designware.txt | 12 ++++++ > > > > drivers/i2c/busses/i2c-designware-core.c | 6 ++- > > > > drivers/i2c/busses/i2c-designware-core.h | 4 ++ > > > > drivers/i2c/busses/i2c-designware-platdrv.c | 50 ++++++++++++++++++++++ > > > > 4 files changed, 71 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt > > > > index fee26dc..51a55c6 100644 > > > > --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt > > > > +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt > > > > @@ -20,6 +20,13 @@ Optional properties : > > > > - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds. > > > > This value which is by default 300ns is used to compute the tHIGH period. > > > > > > > > + - scl-gpios: specify the gpio related to SCL pin > > > > + > > > > + - sda-gpios: specify the gpio related to SDA pin > > > > + > > > > + - pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c > > > > + bus recovery, call it "gpio" state > > > > + > > > > Example : > > > > > > > > i2c@f0000 { > > > > @@ -42,4 +49,9 @@ Example : > > > > i2c-sda-hold-time-ns = <300>; > > > > i2c-sda-falling-time-ns = <300>; > > > > i2c-scl-falling-time-ns = <300>; > > > > + pinctrl-names = "default", "gpio"; > > > > + pinctrl-0 = <&pinctrl_i2c1_default>; > > > > + pinctrl-1 = <&pinctrl_i2c1_gpio>; > > > > + scl-gpios = <&porta 26 GPIO_ACTIVE_HIGH>; > > > > + sda-gpios = <&porta 27 GPIO_ACTIVE_HIGH>; > > > > }; > > > > diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c > > > > index 4255eaa..be40de1 100644 > > > > --- a/drivers/i2c/busses/i2c-designware-core.c > > > > +++ b/drivers/i2c/busses/i2c-designware-core.c > > > > @@ -399,7 +399,10 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) > > > > while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { > > > > if (timeout <= 0) { > > > > dev_warn(dev->dev, "timeout waiting for bus ready\n"); > > > > - return -ETIMEDOUT; > > > > + i2c_recover_bus(&dev->adapter); > > > > + if (dw_readl(dev, DW_IC_STATUS) > > > > + & DW_IC_STATUS_ACTIVITY) > > > > + return -ETIMEDOUT; > > > > } > > > > timeout--; > > > > usleep_range(1000, 1100); > > > > @@ -665,6 +668,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > > > > /* wait for tx to complete */ > > > > if (!wait_for_completion_timeout(&dev->cmd_complete, HZ)) { > > > > dev_err(dev->dev, "controller timed out\n"); > > > > + i2c_recover_bus(&dev->adapter); > > > > /* i2c_dw_init implicitly disables the adapter */ > > > > i2c_dw_init(dev); > > > > ret = -ETIMEDOUT; > > > > diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h > > > > index cd409e7..26c84ee 100644 > > > > --- a/drivers/i2c/busses/i2c-designware-core.h > > > > +++ b/drivers/i2c/busses/i2c-designware-core.h > > > > @@ -104,6 +104,10 @@ struct dw_i2c_dev { > > > > u16 fs_lcnt; > > > > int (*acquire_lock)(struct dw_i2c_dev *dev); > > > > void (*release_lock)(struct dw_i2c_dev *dev); > > > > + struct i2c_bus_recovery_info rinfo; > > > > + struct pinctrl *pinctrl; > > > > + struct pinctrl_state *pinctrl_pins_default; > > > > + struct pinctrl_state *pinctrl_pins_gpio; > > > > bool pm_runtime_disabled; > > > > }; > > > > > > > > diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c > > > > index 1488cea..62bded9 100644 > > > > --- a/drivers/i2c/busses/i2c-designware-platdrv.c > > > > +++ b/drivers/i2c/busses/i2c-designware-platdrv.c > > > > @@ -33,6 +33,7 @@ > > > > #include <linux/err.h> > > > > #include <linux/interrupt.h> > > > > #include <linux/of.h> > > > > +#include <linux/of_gpio.h> > > > > #include <linux/platform_device.h> > > > > #include <linux/pm.h> > > > > #include <linux/pm_runtime.h> > > > > @@ -148,6 +149,49 @@ static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare) > > > > return 0; > > > > } > > > > > > > > +static void i2c_dw_plat_prepare_recovery(struct i2c_adapter *adap) > > > > +{ > > > > + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); > > > > + > > > > + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio); > > > > +} > > > > + > > > > +static void i2c_dw_plat_unprepare_recovery(struct i2c_adapter *adap) > > > > +{ > > > > + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); > > > > + > > > > + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default); > > > > +} > > > > + > > > > +static void i2c_dw_plat_init_recovery_info(struct dw_i2c_dev *dev, > > > > + struct platform_device *pdev) > > > > +{ > > > > + struct i2c_bus_recovery_info *rinfo = &dev->rinfo; > > > > + > > > > + dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl, > > > > + PINCTRL_STATE_DEFAULT); > > > > + dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl, > > > > + "gpio"); > > > > + rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0); > > > > + rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0); > > > > + > > > > + if (!gpio_is_valid(rinfo->sda_gpio) || > > > > + !gpio_is_valid(rinfo->scl_gpio) || > > > > + IS_ERR(dev->pinctrl_pins_default) || > > > > + IS_ERR(dev->pinctrl_pins_gpio)) { > > > > + dev_dbg(&pdev->dev, "recovery information incomplete\n"); > > > > + return; > > > > For ACPI, we should return here, right? > > I hope so. And I do not want to see any useless messages about > incomplete recovery information on my PC. Got your points. > > > > > + } > > > > + > > > > + dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n", > > > > + rinfo->sda_gpio, rinfo->scl_gpio); > > > > + > > > > + rinfo->prepare_recovery = i2c_dw_plat_prepare_recovery; > > > > + rinfo->unprepare_recovery = i2c_dw_plat_unprepare_recovery; > > > > + rinfo->recover_bus = i2c_generic_gpio_recovery; > > > > > > This whole thing is DT specific and I don't see how we can do the same > > > for ACPI. Should it be enabled only when the controller was enumerated > > > from DT? > > > > Per my understanding, for ACPI, the pinctrl_pins_default, pinctrl_pins_gpio, > > sda_gpio and scl_gpio will be invalid or err, so we won't setup rinfo > > at all. However, I have no acpi platform which have i2c designware to double > > confirm. > > What happens to those of_get_ functions when you pass NULL of_node? If > they do not crash then I suppose it is fine. I just checked the code, If CONFIG_OF isn't enabled, of_get_* will return error. If CONFIG_OF is enabled, but NULL of_node is passed, of_get_* will also return error, so it's fine ;) > > Anyhow it might be good idea to do something like > > if (!pdev->dev.of_node) > return; > > in the beginning of that function. Sounds a good idea, will do in next version. Thanks for your review, Jisheng -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt index fee26dc..51a55c6 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt @@ -20,6 +20,13 @@ Optional properties : - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds. This value which is by default 300ns is used to compute the tHIGH period. + - scl-gpios: specify the gpio related to SCL pin + + - sda-gpios: specify the gpio related to SDA pin + + - pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c + bus recovery, call it "gpio" state + Example : i2c@f0000 { @@ -42,4 +49,9 @@ Example : i2c-sda-hold-time-ns = <300>; i2c-sda-falling-time-ns = <300>; i2c-scl-falling-time-ns = <300>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&porta 26 GPIO_ACTIVE_HIGH>; + sda-gpios = <&porta 27 GPIO_ACTIVE_HIGH>; }; diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 4255eaa..be40de1 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -399,7 +399,10 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { if (timeout <= 0) { dev_warn(dev->dev, "timeout waiting for bus ready\n"); - return -ETIMEDOUT; + i2c_recover_bus(&dev->adapter); + if (dw_readl(dev, DW_IC_STATUS) + & DW_IC_STATUS_ACTIVITY) + return -ETIMEDOUT; } timeout--; usleep_range(1000, 1100); @@ -665,6 +668,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) /* wait for tx to complete */ if (!wait_for_completion_timeout(&dev->cmd_complete, HZ)) { dev_err(dev->dev, "controller timed out\n"); + i2c_recover_bus(&dev->adapter); /* i2c_dw_init implicitly disables the adapter */ i2c_dw_init(dev); ret = -ETIMEDOUT; diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index cd409e7..26c84ee 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -104,6 +104,10 @@ struct dw_i2c_dev { u16 fs_lcnt; int (*acquire_lock)(struct dw_i2c_dev *dev); void (*release_lock)(struct dw_i2c_dev *dev); + struct i2c_bus_recovery_info rinfo; + struct pinctrl *pinctrl; + struct pinctrl_state *pinctrl_pins_default; + struct pinctrl_state *pinctrl_pins_gpio; bool pm_runtime_disabled; }; diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 1488cea..62bded9 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -33,6 +33,7 @@ #include <linux/err.h> #include <linux/interrupt.h> #include <linux/of.h> +#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/pm_runtime.h> @@ -148,6 +149,49 @@ static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare) return 0; } +static void i2c_dw_plat_prepare_recovery(struct i2c_adapter *adap) +{ + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); + + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio); +} + +static void i2c_dw_plat_unprepare_recovery(struct i2c_adapter *adap) +{ + struct dw_i2c_dev *dev = i2c_get_adapdata(adap); + + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default); +} + +static void i2c_dw_plat_init_recovery_info(struct dw_i2c_dev *dev, + struct platform_device *pdev) +{ + struct i2c_bus_recovery_info *rinfo = &dev->rinfo; + + dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl, + PINCTRL_STATE_DEFAULT); + dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl, + "gpio"); + rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0); + rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0); + + if (!gpio_is_valid(rinfo->sda_gpio) || + !gpio_is_valid(rinfo->scl_gpio) || + IS_ERR(dev->pinctrl_pins_default) || + IS_ERR(dev->pinctrl_pins_gpio)) { + dev_dbg(&pdev->dev, "recovery information incomplete\n"); + return; + } + + dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n", + rinfo->sda_gpio, rinfo->scl_gpio); + + rinfo->prepare_recovery = i2c_dw_plat_prepare_recovery; + rinfo->unprepare_recovery = i2c_dw_plat_unprepare_recovery; + rinfo->recover_bus = i2c_generic_gpio_recovery; + dev->adapter.bus_recovery_info = rinfo; +} + static int dw_i2c_plat_probe(struct platform_device *pdev) { struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev); @@ -165,6 +209,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) if (!dev) return -ENOMEM; + dev->pinctrl = devm_pinctrl_get(&pdev->dev); + if (IS_ERR(dev->pinctrl)) + return PTR_ERR(dev->pinctrl); + + i2c_dw_plat_init_recovery_info(dev, pdev); + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); dev->base = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(dev->base))
Implement bus recovery methods for i2c designware so we can recover from situations where SCL/SDA are stuck low. The recovery method is similar as i2c-imx: "config the i2c pinctrl to gpio mode by calling pinctrl sleep set function, and then use GPIO to emulate the i2c protocol to send nine dummy clock to recover i2c device. After recovery, set i2c pinctrl to default group setting. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> --- depends on runtime pm patches http://lists.infradead.org/pipermail/linux-arm-kernel/2016-April/422202.html .../devicetree/bindings/i2c/i2c-designware.txt | 12 ++++++ drivers/i2c/busses/i2c-designware-core.c | 6 ++- drivers/i2c/busses/i2c-designware-core.h | 4 ++ drivers/i2c/busses/i2c-designware-platdrv.c | 50 ++++++++++++++++++++++ 4 files changed, 71 insertions(+), 1 deletion(-)