new file mode 100644
@@ -0,0 +1,16 @@
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot.imx"
+ offset = 1024
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ size = 512M
+ }
+}
new file mode 100755
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+ --rootpath "${TARGET_DIR}" \
+ --tmppath "${GENIMAGE_TMP}" \
+ --inputpath "${BINARIES_DIR}" \
+ --outputpath "${BINARIES_DIR}" \
+ --config "${GENIMAGE_CFG}"
+
+exit $?
@@ -2,11 +2,11 @@ Buildroot for Boundary Devices Nitrogen6X:
http://boundarydevices.com/products/nitrogen6x-board-imx6-arm-cortex-a9-sbc/
-To install, simply write rootfs.ext2 to the first partition of a uSD card:
+To install, simply copy the image to a uSD card:
-sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
+sudo dd if=output/images/sdcard.img of=/dev/sdX
-Where 'sdX1' is the device node of the uSD partition.
+Where 'sdX' is the device node of the uSD partition.
To upgrade u-boot, cancel autoboot and type:
@@ -6,11 +6,13 @@ BR2_cortex_a9=y
BR2_TARGET_GENERIC_GETTY=y
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/boundarydevices/nitrogen6x/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/nitrogen6x/post-image.sh"
+BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
# filesystem
BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_2r1=y
+BR2_TARGET_ROOTFS_EXT2_4=y
# Lock headers to match kernel
BR2_KERNEL_HEADERS_VERSION=y
@@ -6,11 +6,13 @@ BR2_cortex_a9=y
BR2_TARGET_GENERIC_GETTY=y
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/boundarydevices/nitrogen6x/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/nitrogen6x/post-image.sh"
+BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
# filesystem
BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_2r1=y
+BR2_TARGET_ROOTFS_EXT2_4=y
# Lock headers to match kernel
BR2_KERNEL_HEADERS_VERSION=y
Also updating the documentation with the dd instruction to flash the bootbale media. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> --- board/boundarydevices/nitrogen6x/genimage.cfg | 16 ++++++++++++++++ board/boundarydevices/nitrogen6x/post-image.sh | 16 ++++++++++++++++ board/boundarydevices/nitrogen6x/readme.txt | 6 +++--- configs/nitrogen6sx_defconfig | 4 +++- configs/nitrogen6x_defconfig | 4 +++- 5 files changed, 41 insertions(+), 5 deletions(-) create mode 100644 board/boundarydevices/nitrogen6x/genimage.cfg create mode 100755 board/boundarydevices/nitrogen6x/post-image.sh