| Message ID | 1453277183-5412-5-git-send-email-jszhang@marvell.com |
|---|---|
| State | Superseded, archived |
| Delegated to: | David Miller |
| Headers | show |
Dear Jisheng Zhang, On Wed, 20 Jan 2016 16:06:23 +0800, Jisheng Zhang wrote: > diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt > index aeea50c..f85b93b 100644 > --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt > +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt > @@ -6,12 +6,16 @@ Required properties: > - interrupts: interrupt for the device > - phy: See ethernet.txt file in the same directory. > - phy-mode: See ethernet.txt file in the same directory > -- clocks: a pointer to the reference clock for this device. > +- clocks: Array of clocks required for this device; requires at least one > + for CORE clock. Rather than "Array", I would say "list", so what about: - clocks: List of clocks for this device. At least one clock is mandatory for the core clock. If several clocks are given, then the clock-names property must be used to identify them. > Optional properties: > - tx-csum-limit: maximum mtu supported by port that allow TX checksum. > Value is presented in bytes. If not used, by default 1600B is set for > "marvell,armada-370-neta" and 9800B for others. > +- clock-names: Array of names corresponding to clocks property; shall be > + "core" for CORE clock and "axi" for optional AXI clock. Array -> List. Thanks! Thomas
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index aeea50c..f85b93b 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -6,12 +6,16 @@ Required properties: - interrupts: interrupt for the device - phy: See ethernet.txt file in the same directory. - phy-mode: See ethernet.txt file in the same directory -- clocks: a pointer to the reference clock for this device. +- clocks: Array of clocks required for this device; requires at least one + for CORE clock. Optional properties: - tx-csum-limit: maximum mtu supported by port that allow TX checksum. Value is presented in bytes. If not used, by default 1600B is set for "marvell,armada-370-neta" and 9800B for others. +- clock-names: Array of names corresponding to clocks property; shall be + "core" for CORE clock and "axi" for optional AXI clock. + Example:
Now that mvneta driver allows to have more than one clock defined, update the clocks property and document the clock-names property. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> --- Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)