diff mbox

[U-Boot] video: Typo cleanup in drivers/video/da8xx-fb.c

Message ID alpine.LFD.2.20.1512161145410.14086@localhost
State Accepted
Delegated to: Anatolij Gustschin
Headers show

Commit Message

Robert P. J. Day Dec. 16, 2015, 4:47 p.m. UTC
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

---

  more tidying up as i run across it ...



rday

Comments

Anatolij Gustschin Dec. 16, 2015, 8:04 p.m. UTC | #1
On Wed, 16 Dec 2015 11:47:39 -0500 (EST)
"Robert P. J. Day" <rpjday@crashcourse.ca> wrote:
> 
> Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

applied to u-boot-video/master, thanks!

--
Anatolij
diff mbox

Patch

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index e2b2144..468f385d 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -379,7 +379,7 @@  static void lcd_cfg_ac_bias(int period, int transitions_per_int)
 {
 	u32 reg;

-	/* Set the AC Bias Period and Number of Transisitons per Interrupt */
+	/* Set the AC Bias Period and Number of Transitions per Interrupt */
 	reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2) & 0xFFF00000;
 	reg |= LCD_AC_BIAS_FREQUENCY(period) |
 		LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int);
@@ -487,7 +487,7 @@  static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height,
 	/* Pixels per line = (PPL + 1)*16 */
 	if (lcd_revision == LCD_VERSION_1) {
 		/*
-		 * 0x3F in bits 4..9 gives max horisontal resolution = 1024
+		 * 0x3F in bits 4..9 gives max horizontal resolution = 1024
 		 * pixels
 		 */
 		width &= 0x3f0;
@@ -695,7 +695,7 @@  static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
 	lcd_cfg_vertical_sync(panel->vbp, panel->vsw, panel->vfp);
 	lcd_cfg_horizontal_sync(panel->hbp, panel->hsw, panel->hfp);

-	/* Configure for disply */
+	/* Configure for display */
 	ret = lcd_cfg_display(cfg);
 	if (ret < 0)
 		return ret;
@@ -761,7 +761,7 @@  static u32 lcdc_irq_handler_rev01(void)

 		lcdc_write(stat, &da8xx_fb_reg_base->stat);

-		/* Disable PL completion inerrupt */
+		/* Disable PL completion interrupt */
 		reg_ras  = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
 		reg_ras &= ~LCD_V1_PL_INT_ENA;
 		lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl);
@@ -810,7 +810,7 @@  static u32 lcdc_irq_handler_rev02(void)

 		lcdc_write(stat, &da8xx_fb_reg_base->masked_stat);

-		/* Disable PL completion inerrupt */
+		/* Disable PL completion interrupt */
 		reg_int  = lcdc_read(&da8xx_fb_reg_base->int_ena_clr) |
 			(LCD_V2_PL_INT_ENA);
 		lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_clr);