| Message ID | 1445114431-9524-6-git-send-email-paul.gortmaker@windriver.com |
|---|---|
| State | Accepted |
| Delegated to: | Tom Rini |
| Headers | show |
On Sat, Oct 17, 2015 at 04:40:30PM -0400, Paul Gortmaker wrote: [nuked most of the commit message as it's now not true] Applied to u-boot/master, thanks!
On 2015-10-19 08:07 PM, Tom Rini wrote: > On Sat, Oct 17, 2015 at 04:40:30PM -0400, Paul Gortmaker wrote: > > [nuked most of the commit message as it's now not true] Ah crap, I forgot to get rid of that; thanks for tossing it. P. -- > > Applied to u-boot/master, thanks! >
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 9fe90f00ff2a..2f3ec2e20088 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -20,6 +20,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD + /* High Level Configuration Options */ #define CONFIG_MPC8641 1 /* MPC8641 specific */ #define CONFIG_SBC8641D 1 /* SBC8641D board specific */
Tested on commit 3ea0953d36023d7e50fb00b2e258d8fb2828aeac ("dm: Move pre-reloc init earlier to cope with board_early_init_f()") since the commit after that ("Set up stdio earlier when using driver model") hangs this board at "Net:" init, just like it hangs the sbc8548 board[1]. So, until that is resolved, this will be the newest functional baseline for both boards. Boot up looks as follows: ------------------------------- U-Boot 2014.10-rc2-00061-gb5e69635dc20 (Aug 24 2015 - 12:20:40) CPU: 8641D, Version: 2.0, (0x80900120) Core: e600 Core 0, Version: 2.2, (0x80040202) Clock Configuration: CPU:1000 MHz, MPX:400 MHz DDR:200 MHz (400 MT/s data rate), LBC:25 MHz L1: D-cache 32 KiB enabled I-cache 32 KiB enabled L2: 512 KiB enabled I2C: ready DRAM: 512 MiB Flash: 16 MiB SRIO1: disabled PCIe1: Root Complex, no link, regs @ 0xf8008000 PCIe1: Bus 00 - 00 PCIe2: Root Complex, no link, regs @ 0xf8009000 PCIe2: Bus 01 - 01 In: serial Out: serial Err: serial Net: eTSEC1, eTSEC2, eTSEC3, eTSEC4 Hit any key to stop autoboot: 0 => ver U-Boot 2014.10-rc2-00061-gb5e69635dc20 (Aug 24 2015 - 12:20:40) powerpc-linux-gcc (GCC) 4.5.2 GNU ld (GNU Binutils) 2.21 => ------------------------------- As can be seen, the "generic" banner warning message is now gone. [1] sbc8548 hang: https://www.marc.info/?l=u-boot&m=142655649417364&w=3 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> --- include/configs/sbc8641d.h | 2 ++ 1 file changed, 2 insertions(+)