Message ID | 1442339861-30300-2-git-send-email-afd@ti.com |
---|---|
State | New |
Headers | show |
On Tue, 15 Sep 2015, Andrew F. Davis wrote: > The TPS65912 PMIC contains several regulators and a GPIO controller. > Add bindings for the TPS65912 PMIC. > > Signed-off-by: Andrew F. Davis <afd@ti.com> > --- > .../devicetree/bindings/gpio/gpio-tps65912.txt | 17 +++++++++ > Documentation/devicetree/bindings/mfd/tps65912.txt | 43 ++++++++++++++++++++++ > .../bindings/regulator/tps65912-regulator.txt | 32 ++++++++++++++++ > 3 files changed, 92 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65912.txt > create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt > create mode 100644 Documentation/devicetree/bindings/regulator/tps65912-regulator.txt > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt > new file mode 100644 > index 0000000..f65370b > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt > @@ -0,0 +1,17 @@ > +* TPS65912 GPIO controller bindings Suggest s/controller/Controller/ > +Required properties: > + - compatible : Should be "ti,tps65912-gpio". > + - gpio-controller : Marks the device node as a gpio controller. s/gpio/GPIO/ As above for controller. > + - #gpio-cells : Should be two. The first cell is the pin number and > + the second cell is used to specify the gpio polarity: > + 0 = active high > + 1 = active low Best to use the #defines in include/dt-bindings/gpio. > +Example: > + > + gpio4: tps65912_gpio { > + compatible = "ti,tps65912-gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + }; > diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt > new file mode 100644 > index 0000000..081af66 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/tps65912.txt > @@ -0,0 +1,43 @@ > +* TPS65912 Power Management Integrated Circuit bindings > + > +Required properties: > + - compatible : Should be "ti,tps65912". > + - reg : Slave address or chip select number (I2C / SPI). > + - interrupt-parent : The parent interrupt controller. > + - interrupts : The interrupt line the device is connected to. > + - interrupt-controller : Marks the device node as an interrupt controller. > + - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. s/the/The/ > + The first cell is the IRQ number. > + The second cell is the flags, encoded as the trigger masks from > + Documentation/devicetree/bindings/interrupts.txt No such file. > +Optional nodes: > + - Regulators: Documentation/devicetree/bindings/regulator/tps65912-regulator.txt > + - GPIO: Documentation/devicetree/bindings/gpio/gpio-tps65912.txt. Better to use ../gpio, ../regulator, etc. "Regulators" and "GPIO" aren't valid node names. Please be more specific. > +Example: > + > + pmic: tps65912@2d { > + compatible = "ti,tps65912"; > + reg = <0x2d>; > + interrupt-parent = <&gpio1>; > + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + dcdc1: regulator-dcdc1 { > + compatible = "ti,tps65912-dcdc1"; > + regulator-name = "vdd_core"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <1144000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + ... No need for this. > + gpio4: tps65912_gpio { > + compatible = "ti,tps65912-gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt > new file mode 100644 > index 0000000..a417ff7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt > @@ -0,0 +1,32 @@ > +* TPS65912 regulator bindings > + > +Required properties: > + - compatible: Should be: > + - "ti,tps65912-dcdc1" for DCDC1 > + - "ti,tps65912-dcdc2" for DCDC2 > + - "ti,tps65912-dcdc3" for DCDC3 > + - "ti,tps65912-dcdc4" for DCDC4 > + - "ti,tps65912-ldo1" for LDO1 > + - "ti,tps65912-ldo2" for LDO2 > + - "ti,tps65912-ldo3" for LDO3 > + - "ti,tps65912-ldo4" for LDO4 > + - "ti,tps65912-ldo5" for LDO5 > + - "ti,tps65912-ldo6" for LDO6 > + - "ti,tps65912-ldo7" for LDO7 > + - "ti,tps65912-ldo8" for LDO8 > + - "ti,tps65912-ldo9" for LDO9 > + - "ti,tps65912-ldo10" for LDO10 > + > +Optional properties: > + - Any optional property defined in bindings/regulator/regulator.txt ../regulator/... > +Example: > + > + xyz: regulator@0 { > + compatible = "ti,tps65912-dcdc1"; > + regulator-name = "vdd_core"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <1144000>; > + regulator-boot-on; > + regulator-always-on; > + };
On 09/19/2015 11:16 PM, Lee Jones wrote: > On Tue, 15 Sep 2015, Andrew F. Davis wrote: > >> The TPS65912 PMIC contains several regulators and a GPIO controller. >> Add bindings for the TPS65912 PMIC. >> >> Signed-off-by: Andrew F. Davis <afd@ti.com> >> --- >> .../devicetree/bindings/gpio/gpio-tps65912.txt | 17 +++++++++ >> Documentation/devicetree/bindings/mfd/tps65912.txt | 43 ++++++++++++++++++++++ >> .../bindings/regulator/tps65912-regulator.txt | 32 ++++++++++++++++ >> 3 files changed, 92 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65912.txt >> create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt >> create mode 100644 Documentation/devicetree/bindings/regulator/tps65912-regulator.txt >> >> diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt >> new file mode 100644 >> index 0000000..f65370b >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt >> @@ -0,0 +1,17 @@ >> +* TPS65912 GPIO controller bindings > > Suggest s/controller/Controller/ > ACK >> +Required properties: >> + - compatible : Should be "ti,tps65912-gpio". >> + - gpio-controller : Marks the device node as a gpio controller. > > s/gpio/GPIO/ > > As above for controller. > ACK >> + - #gpio-cells : Should be two. The first cell is the pin number and >> + the second cell is used to specify the gpio polarity: >> + 0 = active high >> + 1 = active low > > Best to use the #defines in include/dt-bindings/gpio. > ACK >> +Example: >> + >> + gpio4: tps65912_gpio { >> + compatible = "ti,tps65912-gpio"; >> + gpio-controller; >> + #gpio-cells = <2>; >> + }; >> diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt >> new file mode 100644 >> index 0000000..081af66 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mfd/tps65912.txt >> @@ -0,0 +1,43 @@ >> +* TPS65912 Power Management Integrated Circuit bindings >> + >> +Required properties: >> + - compatible : Should be "ti,tps65912". >> + - reg : Slave address or chip select number (I2C / SPI). >> + - interrupt-parent : The parent interrupt controller. >> + - interrupts : The interrupt line the device is connected to. >> + - interrupt-controller : Marks the device node as an interrupt controller. >> + - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. > > s/the/The/ > ACK >> + The first cell is the IRQ number. >> + The second cell is the flags, encoded as the trigger masks from >> + Documentation/devicetree/bindings/interrupts.txt > > No such file. > Yeah, this is an unchecked copy/paste on my part, other bindings did it this also, so I just submitted a patch to fix them too. >> +Optional nodes: >> + - Regulators: Documentation/devicetree/bindings/regulator/tps65912-regulator.txt >> + - GPIO: Documentation/devicetree/bindings/gpio/gpio-tps65912.txt. > > Better to use ../gpio, ../regulator, etc. > > "Regulators" and "GPIO" aren't valid node names. > > Please be more specific. > OK, I'll see if I can clear this up. >> +Example: >> + >> + pmic: tps65912@2d { >> + compatible = "ti,tps65912"; >> + reg = <0x2d>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + >> + dcdc1: regulator-dcdc1 { >> + compatible = "ti,tps65912-dcdc1"; >> + regulator-name = "vdd_core"; >> + regulator-min-microvolt = <912000>; >> + regulator-max-microvolt = <1144000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + ... > > No need for this. > ACK >> + gpio4: tps65912_gpio { >> + compatible = "ti,tps65912-gpio"; >> + gpio-controller; >> + #gpio-cells = <2>; >> + }; >> + }; >> diff --git a/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt >> new file mode 100644 >> index 0000000..a417ff7 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt >> @@ -0,0 +1,32 @@ >> +* TPS65912 regulator bindings >> + >> +Required properties: >> + - compatible: Should be: >> + - "ti,tps65912-dcdc1" for DCDC1 >> + - "ti,tps65912-dcdc2" for DCDC2 >> + - "ti,tps65912-dcdc3" for DCDC3 >> + - "ti,tps65912-dcdc4" for DCDC4 >> + - "ti,tps65912-ldo1" for LDO1 >> + - "ti,tps65912-ldo2" for LDO2 >> + - "ti,tps65912-ldo3" for LDO3 >> + - "ti,tps65912-ldo4" for LDO4 >> + - "ti,tps65912-ldo5" for LDO5 >> + - "ti,tps65912-ldo6" for LDO6 >> + - "ti,tps65912-ldo7" for LDO7 >> + - "ti,tps65912-ldo8" for LDO8 >> + - "ti,tps65912-ldo9" for LDO9 >> + - "ti,tps65912-ldo10" for LDO10 >> + >> +Optional properties: >> + - Any optional property defined in bindings/regulator/regulator.txt > > ../regulator/... > Not really sure what you mean here? Thanks, Andrew >> +Example: >> + >> + xyz: regulator@0 { >> + compatible = "ti,tps65912-dcdc1"; >> + regulator-name = "vdd_core"; >> + regulator-min-microvolt = <912000>; >> + regulator-max-microvolt = <1144000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; > -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 21 Sep 2015, Andrew F. Davis wrote: > On 09/19/2015 11:16 PM, Lee Jones wrote: > >On Tue, 15 Sep 2015, Andrew F. Davis wrote: > > > >>The TPS65912 PMIC contains several regulators and a GPIO controller. > >>Add bindings for the TPS65912 PMIC. > >> > >>Signed-off-by: Andrew F. Davis <afd@ti.com> > >>--- > >> .../devicetree/bindings/gpio/gpio-tps65912.txt | 17 +++++++++ > >> Documentation/devicetree/bindings/mfd/tps65912.txt | 43 ++++++++++++++++++++++ > >> .../bindings/regulator/tps65912-regulator.txt | 32 ++++++++++++++++ > >> 3 files changed, 92 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65912.txt > >> create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt > >> create mode 100644 Documentation/devicetree/bindings/regulator/tps65912-regulator.txt [...] > >>+Optional nodes: > >>+ - Regulators: Documentation/devicetree/bindings/regulator/tps65912-regulator.txt > >>+ - GPIO: Documentation/devicetree/bindings/gpio/gpio-tps65912.txt. > > > >Better to use ../gpio, ../regulator, etc. > > > >"Regulators" and "GPIO" aren't valid node names. > > > >Please be more specific. > > > > OK, I'll see if I can clear this up. [...] > >>+Optional properties: > >>+ - Any optional property defined in bindings/regulator/regulator.txt > > > >../regulator/... > > > > Not really sure what you mean here? Same as above. Use "../regulator/regulator.txt" instead.
On 09/21/2015 06:07 PM, Lee Jones wrote: > On Mon, 21 Sep 2015, Andrew F. Davis wrote: >> On 09/19/2015 11:16 PM, Lee Jones wrote: >>> On Tue, 15 Sep 2015, Andrew F. Davis wrote: >>> >>>> The TPS65912 PMIC contains several regulators and a GPIO controller. >>>> Add bindings for the TPS65912 PMIC. >>>> >>>> Signed-off-by: Andrew F. Davis <afd@ti.com> >>>> --- >>>> .../devicetree/bindings/gpio/gpio-tps65912.txt | 17 +++++++++ >>>> Documentation/devicetree/bindings/mfd/tps65912.txt | 43 ++++++++++++++++++++++ >>>> .../bindings/regulator/tps65912-regulator.txt | 32 ++++++++++++++++ >>>> 3 files changed, 92 insertions(+) >>>> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65912.txt >>>> create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt >>>> create mode 100644 Documentation/devicetree/bindings/regulator/tps65912-regulator.txt > > [...] > >>>> +Optional nodes: >>>> + - Regulators: Documentation/devicetree/bindings/regulator/tps65912-regulator.txt >>>> + - GPIO: Documentation/devicetree/bindings/gpio/gpio-tps65912.txt. >>> >>> Better to use ../gpio, ../regulator, etc. >>> >>> "Regulators" and "GPIO" aren't valid node names. >>> >>> Please be more specific. >>> >> >> OK, I'll see if I can clear this up. > > [...] > >>>> +Optional properties: >>>> + - Any optional property defined in bindings/regulator/regulator.txt >>> >>> ../regulator/... >>> >> >> Not really sure what you mean here? > > Same as above. Use "../regulator/regulator.txt" instead. > Oh, I see, fixed. -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt new file mode 100644 index 0000000..f65370b --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt @@ -0,0 +1,17 @@ +* TPS65912 GPIO controller bindings + +Required properties: + - compatible : Should be "ti,tps65912-gpio". + - gpio-controller : Marks the device node as a gpio controller. + - #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low + +Example: + + gpio4: tps65912_gpio { + compatible = "ti,tps65912-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt new file mode 100644 index 0000000..081af66 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tps65912.txt @@ -0,0 +1,43 @@ +* TPS65912 Power Management Integrated Circuit bindings + +Required properties: + - compatible : Should be "ti,tps65912". + - reg : Slave address or chip select number (I2C / SPI). + - interrupt-parent : The parent interrupt controller. + - interrupts : The interrupt line the device is connected to. + - interrupt-controller : Marks the device node as an interrupt controller. + - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. + The first cell is the IRQ number. + The second cell is the flags, encoded as the trigger masks from + Documentation/devicetree/bindings/interrupts.txt + +Optional nodes: + - Regulators: Documentation/devicetree/bindings/regulator/tps65912-regulator.txt + - GPIO: Documentation/devicetree/bindings/gpio/gpio-tps65912.txt. + +Example: + + pmic: tps65912@2d { + compatible = "ti,tps65912"; + reg = <0x2d>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + compatible = "ti,tps65912-dcdc1"; + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + ... + + gpio4: tps65912_gpio { + compatible = "ti,tps65912-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt new file mode 100644 index 0000000..a417ff7 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt @@ -0,0 +1,32 @@ +* TPS65912 regulator bindings + +Required properties: + - compatible: Should be: + - "ti,tps65912-dcdc1" for DCDC1 + - "ti,tps65912-dcdc2" for DCDC2 + - "ti,tps65912-dcdc3" for DCDC3 + - "ti,tps65912-dcdc4" for DCDC4 + - "ti,tps65912-ldo1" for LDO1 + - "ti,tps65912-ldo2" for LDO2 + - "ti,tps65912-ldo3" for LDO3 + - "ti,tps65912-ldo4" for LDO4 + - "ti,tps65912-ldo5" for LDO5 + - "ti,tps65912-ldo6" for LDO6 + - "ti,tps65912-ldo7" for LDO7 + - "ti,tps65912-ldo8" for LDO8 + - "ti,tps65912-ldo9" for LDO9 + - "ti,tps65912-ldo10" for LDO10 + +Optional properties: + - Any optional property defined in bindings/regulator/regulator.txt + +Example: + + xyz: regulator@0 { + compatible = "ti,tps65912-dcdc1"; + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + };
The TPS65912 PMIC contains several regulators and a GPIO controller. Add bindings for the TPS65912 PMIC. Signed-off-by: Andrew F. Davis <afd@ti.com> --- .../devicetree/bindings/gpio/gpio-tps65912.txt | 17 +++++++++ Documentation/devicetree/bindings/mfd/tps65912.txt | 43 ++++++++++++++++++++++ .../bindings/regulator/tps65912-regulator.txt | 32 ++++++++++++++++ 3 files changed, 92 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65912.txt create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt create mode 100644 Documentation/devicetree/bindings/regulator/tps65912-regulator.txt