Message ID | 1437388702-25094-1-git-send-email-contact@paulk.fr |
---|---|
State | Accepted |
Delegated to: | Przemyslaw Marczak |
Headers | show |
Hi Paul, > FASTBOOT is defined both by CONFIG_USB_FUNCTION_FASTBOOT AND > CONFIG_CMD_FASTBOOT, so it doesn't make much sense to have a > CONFIG_USB_FASTBOOT prefix for fastboot-specific options, especially > given that other config options for fastboot use the CONFIG_FASTBOOT > prefix. > > This replaces the CONFIG_USB_FASTBOOT prefix with CONFIG_FASTBOOT, > for consistency. Applied to u-boot-dfu tree. Thanks for your patch! > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > --- > README | 4 ++-- > doc/README.android-fastboot | 4 ++-- > drivers/usb/gadget/f_fastboot.c | 8 ++++---- > include/configs/am335x_evm.h | 4 ++-- > include/configs/bav335x.h | 4 ++-- > include/configs/bcm28155_ap.h | 4 ++-- > include/configs/dra7xx_evm.h | 4 ++-- > include/configs/nitrogen6x.h | 4 ++-- > include/configs/omap3_beagle.h | 4 ++-- > 9 files changed, 20 insertions(+), 20 deletions(-) > > diff --git a/README b/README > index f7a55fc..7a131f3 100644 > --- a/README > +++ b/README > @@ -1732,12 +1732,12 @@ The following options need to be configured: > This enables support for booting images which use > the Android image format header. > > - CONFIG_USB_FASTBOOT_BUF_ADDR > + CONFIG_FASTBOOT_BUF_ADDR > The fastboot protocol requires a large memory buffer > for downloads. Define this to the starting RAM address to use for > downloaded images. > > - CONFIG_USB_FASTBOOT_BUF_SIZE > + CONFIG_FASTBOOT_BUF_SIZE > The fastboot protocol requires a large memory buffer > for downloads. This buffer should be as large as possible for a > platform. Define this to the size available RAM for > fastboot. diff --git a/doc/README.android-fastboot > b/doc/README.android-fastboot index 92f2897..ce12bc5 100644 > --- a/doc/README.android-fastboot > +++ b/doc/README.android-fastboot > @@ -47,8 +47,8 @@ CONFIG_CMD_FASTBOOT and CONFIG_ANDROID_BOOT_IMAGE. > > The fastboot protocol requires a large memory buffer for downloads. > This buffer should be as large as possible for a platform. The > location of the -buffer and size are set with > CONFIG_USB_FASTBOOT_BUF_ADDR and -CONFIG_USB_FASTBOOT_BUF_SIZE. > +buffer and size are set with CONFIG_FASTBOOT_BUF_ADDR and > +CONFIG_FASTBOOT_BUF_SIZE. > > Fastboot partition aliases can also be defined for devices where GPT > limitations prevent user-friendly partition names such as "boot", > "system" diff --git a/drivers/usb/gadget/f_fastboot.c > b/drivers/usb/gadget/f_fastboot.c index 60c846d..ca01a01 100644 > --- a/drivers/usb/gadget/f_fastboot.c > +++ b/drivers/usb/gadget/f_fastboot.c > @@ -380,7 +380,7 @@ static void cb_getvar(struct usb_ep *ep, struct > usb_request *req) !strcmp_l1("max-download-size", cmd)) { > char str_num[12]; > > - sprintf(str_num, "0x%08x", > CONFIG_USB_FASTBOOT_BUF_SIZE); > + sprintf(str_num, "0x%08x", CONFIG_FASTBOOT_BUF_SIZE); > strncat(response, str_num, chars_left); > } else if (!strcmp_l1("serialno", cmd)) { > s = getenv("serial#"); > @@ -430,7 +430,7 @@ static void rx_handler_dl_image(struct usb_ep > *ep, struct usb_request *req) if (buffer_size < transfer_size) > transfer_size = buffer_size; > > - memcpy((void *)CONFIG_USB_FASTBOOT_BUF_ADDR + download_bytes, > + memcpy((void *)CONFIG_FASTBOOT_BUF_ADDR + download_bytes, > buffer, transfer_size); > > pre_dot_num = download_bytes / BYTES_PER_DOT; > @@ -483,7 +483,7 @@ static void cb_download(struct usb_ep *ep, struct > usb_request *req) > if (0 == download_size) { > sprintf(response, "FAILdata invalid size"); > - } else if (download_size > CONFIG_USB_FASTBOOT_BUF_SIZE) { > + } else if (download_size > CONFIG_FASTBOOT_BUF_SIZE) { > download_size = 0; > sprintf(response, "FAILdata too large"); > } else { > @@ -544,7 +544,7 @@ static void cb_flash(struct usb_ep *ep, struct > usb_request *req) > strcpy(response, "FAILno flash device defined"); > #ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV > - fb_mmc_flash_write(cmd, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR, > + fb_mmc_flash_write(cmd, (void *)CONFIG_FASTBOOT_BUF_ADDR, > download_bytes, response); > #endif > fastboot_tx_write_str(response); > diff --git a/include/configs/am335x_evm.h > b/include/configs/am335x_evm.h index 1425b6d..d85a635 100644 > --- a/include/configs/am335x_evm.h > +++ b/include/configs/am335x_evm.h > @@ -301,8 +301,8 @@ > #define CONFIG_USB_FUNCTION_FASTBOOT > #define CONFIG_CMD_FASTBOOT > #define CONFIG_ANDROID_BOOT_IMAGE > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > /* To support eMMC booting */ > #define CONFIG_STORAGE_EMMC > diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h > index 99e3a00..108efaf 100644 > --- a/include/configs/bav335x.h > +++ b/include/configs/bav335x.h > @@ -458,8 +458,8 @@ DEFAULT_LINUX_BOOT_ENV \ > #define CONFIG_USB_FUNCTION_FASTBOOT > #define CONFIG_CMD_FASTBOOT > #define CONFIG_ANDROID_BOOT_IMAGE > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > /* To support eMMC booting */ > #define CONFIG_STORAGE_EMMC > diff --git a/include/configs/bcm28155_ap.h > b/include/configs/bcm28155_ap.h index f023f27..c6ef0d1 100644 > --- a/include/configs/bcm28155_ap.h > +++ b/include/configs/bcm28155_ap.h > @@ -143,8 +143,8 @@ > #define CONFIG_FASTBOOT_FLASH > #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 > #define CONFIG_SYS_CACHELINE_SIZE 64 > -#define CONFIG_USB_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - > SZ_1M) -#define CONFIG_USB_FASTBOOT_BUF_ADDR > CONFIG_SYS_SDRAM_BASE +#define CONFIG_FASTBOOT_BUF_SIZE > (CONFIG_SYS_SDRAM_SIZE - SZ_1M) +#define > CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE #define > CONFIG_USB_GADGET #define CONFIG_USB_GADGET_DUALSPEED > #define CONFIG_USB_GADGET_VBUS_DRAW 0 > diff --git a/include/configs/dra7xx_evm.h > b/include/configs/dra7xx_evm.h index db15cad..456f3c7 100644 > --- a/include/configs/dra7xx_evm.h > +++ b/include/configs/dra7xx_evm.h > @@ -93,8 +93,8 @@ > #define CONFIG_USB_FUNCTION_FASTBOOT > #define CONFIG_CMD_FASTBOOT > #define CONFIG_ANDROID_BOOT_IMAGE > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x2F000000 > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > +#define CONFIG_FASTBOOT_BUF_SIZE 0x2F000000 > #define CONFIG_FASTBOOT_FLASH > #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 > #endif > diff --git a/include/configs/nitrogen6x.h > b/include/configs/nitrogen6x.h index 191c0dd..d01a75b 100644 > --- a/include/configs/nitrogen6x.h > +++ b/include/configs/nitrogen6x.h > @@ -350,7 +350,7 @@ > #define CONFIG_USB_FUNCTION_FASTBOOT > #define CONFIG_CMD_FASTBOOT > #define CONFIG_ANDROID_BOOT_IMAGE > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > #endif /* __CONFIG_H */ > diff --git a/include/configs/omap3_beagle.h > b/include/configs/omap3_beagle.h index 9089876..4d7f355 100644 > --- a/include/configs/omap3_beagle.h > +++ b/include/configs/omap3_beagle.h > @@ -75,8 +75,8 @@ > #define CONFIG_USB_FUNCTION_FASTBOOT > #define CONFIG_CMD_FASTBOOT > #define CONFIG_ANDROID_BOOT_IMAGE > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > /* USB EHCI */ > #define CONFIG_CMD_USB
Le lundi 20 juillet 2015 à 14:57 +0200, Lukasz Majewski a écrit : > Hi Paul, > > > FASTBOOT is defined both by CONFIG_USB_FUNCTION_FASTBOOT AND > > CONFIG_CMD_FASTBOOT, so it doesn't make much sense to have a > > CONFIG_USB_FASTBOOT prefix for fastboot-specific options, especially > > given that other config options for fastboot use the CONFIG_FASTBOOT > > prefix. > > > > This replaces the CONFIG_USB_FASTBOOT prefix with CONFIG_FASTBOOT, > > for consistency. > > Applied to u-boot-dfu tree. > > Thanks for your patch! Thanks for merging all those. Perhaps it's time to submit a pull request? I need those patches merged to get some other things accepted. Thanks! > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > > --- > > README | 4 ++-- > > doc/README.android-fastboot | 4 ++-- > > drivers/usb/gadget/f_fastboot.c | 8 ++++---- > > include/configs/am335x_evm.h | 4 ++-- > > include/configs/bav335x.h | 4 ++-- > > include/configs/bcm28155_ap.h | 4 ++-- > > include/configs/dra7xx_evm.h | 4 ++-- > > include/configs/nitrogen6x.h | 4 ++-- > > include/configs/omap3_beagle.h | 4 ++-- > > 9 files changed, 20 insertions(+), 20 deletions(-) > > > > diff --git a/README b/README > > index f7a55fc..7a131f3 100644 > > --- a/README > > +++ b/README > > @@ -1732,12 +1732,12 @@ The following options need to be configured: > > This enables support for booting images which use > > the Android image format header. > > > > - CONFIG_USB_FASTBOOT_BUF_ADDR > > + CONFIG_FASTBOOT_BUF_ADDR > > The fastboot protocol requires a large memory buffer > > for downloads. Define this to the starting RAM address to use for > > downloaded images. > > > > - CONFIG_USB_FASTBOOT_BUF_SIZE > > + CONFIG_FASTBOOT_BUF_SIZE > > The fastboot protocol requires a large memory buffer > > for downloads. This buffer should be as large as possible for a > > platform. Define this to the size available RAM for > > fastboot. diff --git a/doc/README.android-fastboot > > b/doc/README.android-fastboot index 92f2897..ce12bc5 100644 > > --- a/doc/README.android-fastboot > > +++ b/doc/README.android-fastboot > > @@ -47,8 +47,8 @@ CONFIG_CMD_FASTBOOT and CONFIG_ANDROID_BOOT_IMAGE. > > > > The fastboot protocol requires a large memory buffer for downloads. > > This buffer should be as large as possible for a platform. The > > location of the -buffer and size are set with > > CONFIG_USB_FASTBOOT_BUF_ADDR and -CONFIG_USB_FASTBOOT_BUF_SIZE. > > +buffer and size are set with CONFIG_FASTBOOT_BUF_ADDR and > > +CONFIG_FASTBOOT_BUF_SIZE. > > > > Fastboot partition aliases can also be defined for devices where GPT > > limitations prevent user-friendly partition names such as "boot", > > "system" diff --git a/drivers/usb/gadget/f_fastboot.c > > b/drivers/usb/gadget/f_fastboot.c index 60c846d..ca01a01 100644 > > --- a/drivers/usb/gadget/f_fastboot.c > > +++ b/drivers/usb/gadget/f_fastboot.c > > @@ -380,7 +380,7 @@ static void cb_getvar(struct usb_ep *ep, struct > > usb_request *req) !strcmp_l1("max-download-size", cmd)) { > > char str_num[12]; > > > > - sprintf(str_num, "0x%08x", > > CONFIG_USB_FASTBOOT_BUF_SIZE); > > + sprintf(str_num, "0x%08x", CONFIG_FASTBOOT_BUF_SIZE); > > strncat(response, str_num, chars_left); > > } else if (!strcmp_l1("serialno", cmd)) { > > s = getenv("serial#"); > > @@ -430,7 +430,7 @@ static void rx_handler_dl_image(struct usb_ep > > *ep, struct usb_request *req) if (buffer_size < transfer_size) > > transfer_size = buffer_size; > > > > - memcpy((void *)CONFIG_USB_FASTBOOT_BUF_ADDR + download_bytes, > > + memcpy((void *)CONFIG_FASTBOOT_BUF_ADDR + download_bytes, > > buffer, transfer_size); > > > > pre_dot_num = download_bytes / BYTES_PER_DOT; > > @@ -483,7 +483,7 @@ static void cb_download(struct usb_ep *ep, struct > > usb_request *req) > > if (0 == download_size) { > > sprintf(response, "FAILdata invalid size"); > > - } else if (download_size > CONFIG_USB_FASTBOOT_BUF_SIZE) { > > + } else if (download_size > CONFIG_FASTBOOT_BUF_SIZE) { > > download_size = 0; > > sprintf(response, "FAILdata too large"); > > } else { > > @@ -544,7 +544,7 @@ static void cb_flash(struct usb_ep *ep, struct > > usb_request *req) > > strcpy(response, "FAILno flash device defined"); > > #ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV > > - fb_mmc_flash_write(cmd, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR, > > + fb_mmc_flash_write(cmd, (void *)CONFIG_FASTBOOT_BUF_ADDR, > > download_bytes, response); > > #endif > > fastboot_tx_write_str(response); > > diff --git a/include/configs/am335x_evm.h > > b/include/configs/am335x_evm.h index 1425b6d..d85a635 100644 > > --- a/include/configs/am335x_evm.h > > +++ b/include/configs/am335x_evm.h > > @@ -301,8 +301,8 @@ > > #define CONFIG_USB_FUNCTION_FASTBOOT > > #define CONFIG_CMD_FASTBOOT > > #define CONFIG_ANDROID_BOOT_IMAGE > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > > > /* To support eMMC booting */ > > #define CONFIG_STORAGE_EMMC > > diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h > > index 99e3a00..108efaf 100644 > > --- a/include/configs/bav335x.h > > +++ b/include/configs/bav335x.h > > @@ -458,8 +458,8 @@ DEFAULT_LINUX_BOOT_ENV \ > > #define CONFIG_USB_FUNCTION_FASTBOOT > > #define CONFIG_CMD_FASTBOOT > > #define CONFIG_ANDROID_BOOT_IMAGE > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > > > /* To support eMMC booting */ > > #define CONFIG_STORAGE_EMMC > > diff --git a/include/configs/bcm28155_ap.h > > b/include/configs/bcm28155_ap.h index f023f27..c6ef0d1 100644 > > --- a/include/configs/bcm28155_ap.h > > +++ b/include/configs/bcm28155_ap.h > > @@ -143,8 +143,8 @@ > > #define CONFIG_FASTBOOT_FLASH > > #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 > > #define CONFIG_SYS_CACHELINE_SIZE 64 > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - > > SZ_1M) -#define CONFIG_USB_FASTBOOT_BUF_ADDR > > CONFIG_SYS_SDRAM_BASE +#define CONFIG_FASTBOOT_BUF_SIZE > > (CONFIG_SYS_SDRAM_SIZE - SZ_1M) +#define > > CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE #define > > CONFIG_USB_GADGET #define CONFIG_USB_GADGET_DUALSPEED > > #define CONFIG_USB_GADGET_VBUS_DRAW 0 > > diff --git a/include/configs/dra7xx_evm.h > > b/include/configs/dra7xx_evm.h index db15cad..456f3c7 100644 > > --- a/include/configs/dra7xx_evm.h > > +++ b/include/configs/dra7xx_evm.h > > @@ -93,8 +93,8 @@ > > #define CONFIG_USB_FUNCTION_FASTBOOT > > #define CONFIG_CMD_FASTBOOT > > #define CONFIG_ANDROID_BOOT_IMAGE > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x2F000000 > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x2F000000 > > #define CONFIG_FASTBOOT_FLASH > > #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 > > #endif > > diff --git a/include/configs/nitrogen6x.h > > b/include/configs/nitrogen6x.h index 191c0dd..d01a75b 100644 > > --- a/include/configs/nitrogen6x.h > > +++ b/include/configs/nitrogen6x.h > > @@ -350,7 +350,7 @@ > > #define CONFIG_USB_FUNCTION_FASTBOOT > > #define CONFIG_CMD_FASTBOOT > > #define CONFIG_ANDROID_BOOT_IMAGE > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > > > #endif /* __CONFIG_H */ > > diff --git a/include/configs/omap3_beagle.h > > b/include/configs/omap3_beagle.h index 9089876..4d7f355 100644 > > --- a/include/configs/omap3_beagle.h > > +++ b/include/configs/omap3_beagle.h > > @@ -75,8 +75,8 @@ > > #define CONFIG_USB_FUNCTION_FASTBOOT > > #define CONFIG_CMD_FASTBOOT > > #define CONFIG_ANDROID_BOOT_IMAGE > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > > > /* USB EHCI */ > > #define CONFIG_CMD_USB > > >
Hi Paul, > Le lundi 20 juillet 2015 à 14:57 +0200, Lukasz Majewski a écrit : > > Hi Paul, > > > > > FASTBOOT is defined both by CONFIG_USB_FUNCTION_FASTBOOT AND > > > CONFIG_CMD_FASTBOOT, so it doesn't make much sense to have a > > > CONFIG_USB_FASTBOOT prefix for fastboot-specific options, > > > especially given that other config options for fastboot use the > > > CONFIG_FASTBOOT prefix. > > > > > > This replaces the CONFIG_USB_FASTBOOT prefix with CONFIG_FASTBOOT, > > > for consistency. > > > > Applied to u-boot-dfu tree. > > > > Thanks for your patch! > > Thanks for merging all those. Perhaps it's time to submit a pull > request? I need those patches merged to get some other things > accepted. Could you check if all your posted patches are available in Marek's Vasut tree (u-boot-usb)? It seems like they all are there. > > Thanks! > > > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > > > --- > > > README | 4 ++-- > > > doc/README.android-fastboot | 4 ++-- > > > drivers/usb/gadget/f_fastboot.c | 8 ++++---- > > > include/configs/am335x_evm.h | 4 ++-- > > > include/configs/bav335x.h | 4 ++-- > > > include/configs/bcm28155_ap.h | 4 ++-- > > > include/configs/dra7xx_evm.h | 4 ++-- > > > include/configs/nitrogen6x.h | 4 ++-- > > > include/configs/omap3_beagle.h | 4 ++-- > > > 9 files changed, 20 insertions(+), 20 deletions(-) > > > > > > diff --git a/README b/README > > > index f7a55fc..7a131f3 100644 > > > --- a/README > > > +++ b/README > > > @@ -1732,12 +1732,12 @@ The following options need to be > > > configured: This enables support for booting images which use > > > the Android image format header. > > > > > > - CONFIG_USB_FASTBOOT_BUF_ADDR > > > + CONFIG_FASTBOOT_BUF_ADDR > > > The fastboot protocol requires a large memory > > > buffer for downloads. Define this to the starting RAM address to > > > use for downloaded images. > > > > > > - CONFIG_USB_FASTBOOT_BUF_SIZE > > > + CONFIG_FASTBOOT_BUF_SIZE > > > The fastboot protocol requires a large memory > > > buffer for downloads. This buffer should be as large as possible > > > for a platform. Define this to the size available RAM for > > > fastboot. diff --git a/doc/README.android-fastboot > > > b/doc/README.android-fastboot index 92f2897..ce12bc5 100644 > > > --- a/doc/README.android-fastboot > > > +++ b/doc/README.android-fastboot > > > @@ -47,8 +47,8 @@ CONFIG_CMD_FASTBOOT and > > > CONFIG_ANDROID_BOOT_IMAGE. > > > The fastboot protocol requires a large memory buffer for > > > downloads. This buffer should be as large as possible for a > > > platform. The location of the -buffer and size are set with > > > CONFIG_USB_FASTBOOT_BUF_ADDR and -CONFIG_USB_FASTBOOT_BUF_SIZE. > > > +buffer and size are set with CONFIG_FASTBOOT_BUF_ADDR and > > > +CONFIG_FASTBOOT_BUF_SIZE. > > > > > > Fastboot partition aliases can also be defined for devices where > > > GPT limitations prevent user-friendly partition names such as > > > "boot", "system" diff --git a/drivers/usb/gadget/f_fastboot.c > > > b/drivers/usb/gadget/f_fastboot.c index 60c846d..ca01a01 100644 > > > --- a/drivers/usb/gadget/f_fastboot.c > > > +++ b/drivers/usb/gadget/f_fastboot.c > > > @@ -380,7 +380,7 @@ static void cb_getvar(struct usb_ep *ep, > > > struct usb_request *req) !strcmp_l1("max-download-size", cmd)) { > > > char str_num[12]; > > > > > > - sprintf(str_num, "0x%08x", > > > CONFIG_USB_FASTBOOT_BUF_SIZE); > > > + sprintf(str_num, "0x%08x", > > > CONFIG_FASTBOOT_BUF_SIZE); strncat(response, str_num, chars_left); > > > } else if (!strcmp_l1("serialno", cmd)) { > > > s = getenv("serial#"); > > > @@ -430,7 +430,7 @@ static void rx_handler_dl_image(struct usb_ep > > > *ep, struct usb_request *req) if (buffer_size < transfer_size) > > > transfer_size = buffer_size; > > > > > > - memcpy((void *)CONFIG_USB_FASTBOOT_BUF_ADDR + > > > download_bytes, > > > + memcpy((void *)CONFIG_FASTBOOT_BUF_ADDR + download_bytes, > > > buffer, transfer_size); > > > > > > pre_dot_num = download_bytes / BYTES_PER_DOT; > > > @@ -483,7 +483,7 @@ static void cb_download(struct usb_ep *ep, > > > struct usb_request *req) > > > if (0 == download_size) { > > > sprintf(response, "FAILdata invalid size"); > > > - } else if (download_size > CONFIG_USB_FASTBOOT_BUF_SIZE) > > > { > > > + } else if (download_size > CONFIG_FASTBOOT_BUF_SIZE) { > > > download_size = 0; > > > sprintf(response, "FAILdata too large"); > > > } else { > > > @@ -544,7 +544,7 @@ static void cb_flash(struct usb_ep *ep, struct > > > usb_request *req) > > > strcpy(response, "FAILno flash device defined"); > > > #ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV > > > - fb_mmc_flash_write(cmd, (void > > > *)CONFIG_USB_FASTBOOT_BUF_ADDR, > > > + fb_mmc_flash_write(cmd, (void *)CONFIG_FASTBOOT_BUF_ADDR, > > > download_bytes, response); > > > #endif > > > fastboot_tx_write_str(response); > > > diff --git a/include/configs/am335x_evm.h > > > b/include/configs/am335x_evm.h index 1425b6d..d85a635 100644 > > > --- a/include/configs/am335x_evm.h > > > +++ b/include/configs/am335x_evm.h > > > @@ -301,8 +301,8 @@ > > > #define CONFIG_USB_FUNCTION_FASTBOOT > > > #define CONFIG_CMD_FASTBOOT > > > #define CONFIG_ANDROID_BOOT_IMAGE > > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > > > > > /* To support eMMC booting */ > > > #define CONFIG_STORAGE_EMMC > > > diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h > > > index 99e3a00..108efaf 100644 > > > --- a/include/configs/bav335x.h > > > +++ b/include/configs/bav335x.h > > > @@ -458,8 +458,8 @@ DEFAULT_LINUX_BOOT_ENV \ > > > #define CONFIG_USB_FUNCTION_FASTBOOT > > > #define CONFIG_CMD_FASTBOOT > > > #define CONFIG_ANDROID_BOOT_IMAGE > > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > > > > > /* To support eMMC booting */ > > > #define CONFIG_STORAGE_EMMC > > > diff --git a/include/configs/bcm28155_ap.h > > > b/include/configs/bcm28155_ap.h index f023f27..c6ef0d1 100644 > > > --- a/include/configs/bcm28155_ap.h > > > +++ b/include/configs/bcm28155_ap.h > > > @@ -143,8 +143,8 @@ > > > #define CONFIG_FASTBOOT_FLASH > > > #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 > > > #define CONFIG_SYS_CACHELINE_SIZE 64 > > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE > > > (CONFIG_SYS_SDRAM_SIZE - SZ_1M) -#define > > > CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE +#define > > > CONFIG_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M) +#define > > > CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE #define > > > CONFIG_USB_GADGET #define CONFIG_USB_GADGET_DUALSPEED > > > #define CONFIG_USB_GADGET_VBUS_DRAW 0 > > > diff --git a/include/configs/dra7xx_evm.h > > > b/include/configs/dra7xx_evm.h index db15cad..456f3c7 100644 > > > --- a/include/configs/dra7xx_evm.h > > > +++ b/include/configs/dra7xx_evm.h > > > @@ -93,8 +93,8 @@ > > > #define CONFIG_USB_FUNCTION_FASTBOOT > > > #define CONFIG_CMD_FASTBOOT > > > #define CONFIG_ANDROID_BOOT_IMAGE > > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x2F000000 > > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x2F000000 > > > #define CONFIG_FASTBOOT_FLASH > > > #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 > > > #endif > > > diff --git a/include/configs/nitrogen6x.h > > > b/include/configs/nitrogen6x.h index 191c0dd..d01a75b 100644 > > > --- a/include/configs/nitrogen6x.h > > > +++ b/include/configs/nitrogen6x.h > > > @@ -350,7 +350,7 @@ > > > #define CONFIG_USB_FUNCTION_FASTBOOT > > > #define CONFIG_CMD_FASTBOOT > > > #define CONFIG_ANDROID_BOOT_IMAGE > > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > > > > > #endif /* __CONFIG_H */ > > > diff --git a/include/configs/omap3_beagle.h > > > b/include/configs/omap3_beagle.h index 9089876..4d7f355 100644 > > > --- a/include/configs/omap3_beagle.h > > > +++ b/include/configs/omap3_beagle.h > > > @@ -75,8 +75,8 @@ > > > #define CONFIG_USB_FUNCTION_FASTBOOT > > > #define CONFIG_CMD_FASTBOOT > > > #define CONFIG_ANDROID_BOOT_IMAGE > > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > > > > > /* USB EHCI */ > > > #define CONFIG_CMD_USB > > > > > > >
Le jeudi 23 juillet 2015 à 09:15 +0200, Lukasz Majewski a écrit : > Hi Paul, > > > Le lundi 20 juillet 2015 à 14:57 +0200, Lukasz Majewski a écrit : > > > Hi Paul, > > > > > > > FASTBOOT is defined both by CONFIG_USB_FUNCTION_FASTBOOT AND > > > > CONFIG_CMD_FASTBOOT, so it doesn't make much sense to have a > > > > CONFIG_USB_FASTBOOT prefix for fastboot-specific options, > > > > especially given that other config options for fastboot use the > > > > CONFIG_FASTBOOT prefix. > > > > > > > > This replaces the CONFIG_USB_FASTBOOT prefix with CONFIG_FASTBOOT, > > > > for consistency. > > > > > > Applied to u-boot-dfu tree. > > > > > > Thanks for your patch! > > > > Thanks for merging all those. Perhaps it's time to submit a pull > > request? I need those patches merged to get some other things > > accepted. > > Could you check if all your posted patches are available in Marek's > Vasut tree (u-boot-usb)? > > It seems like they all are there. That's right, but it looks like your tree has some more commits on top. Either way, I would be happy with seeing my patches getting merged, either from Marek's tree or from yours. > > Thanks! > > > > > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > > > > --- > > > > README | 4 ++-- > > > > doc/README.android-fastboot | 4 ++-- > > > > drivers/usb/gadget/f_fastboot.c | 8 ++++---- > > > > include/configs/am335x_evm.h | 4 ++-- > > > > include/configs/bav335x.h | 4 ++-- > > > > include/configs/bcm28155_ap.h | 4 ++-- > > > > include/configs/dra7xx_evm.h | 4 ++-- > > > > include/configs/nitrogen6x.h | 4 ++-- > > > > include/configs/omap3_beagle.h | 4 ++-- > > > > 9 files changed, 20 insertions(+), 20 deletions(-) > > > > > > > > diff --git a/README b/README > > > > index f7a55fc..7a131f3 100644 > > > > --- a/README > > > > +++ b/README > > > > @@ -1732,12 +1732,12 @@ The following options need to be > > > > configured: This enables support for booting images which use > > > > the Android image format header. > > > > > > > > - CONFIG_USB_FASTBOOT_BUF_ADDR > > > > + CONFIG_FASTBOOT_BUF_ADDR > > > > The fastboot protocol requires a large memory > > > > buffer for downloads. Define this to the starting RAM address to > > > > use for downloaded images. > > > > > > > > - CONFIG_USB_FASTBOOT_BUF_SIZE > > > > + CONFIG_FASTBOOT_BUF_SIZE > > > > The fastboot protocol requires a large memory > > > > buffer for downloads. This buffer should be as large as possible > > > > for a platform. Define this to the size available RAM for > > > > fastboot. diff --git a/doc/README.android-fastboot > > > > b/doc/README.android-fastboot index 92f2897..ce12bc5 100644 > > > > --- a/doc/README.android-fastboot > > > > +++ b/doc/README.android-fastboot > > > > @@ -47,8 +47,8 @@ CONFIG_CMD_FASTBOOT and > > > > CONFIG_ANDROID_BOOT_IMAGE. > > > > The fastboot protocol requires a large memory buffer for > > > > downloads. This buffer should be as large as possible for a > > > > platform. The location of the -buffer and size are set with > > > > CONFIG_USB_FASTBOOT_BUF_ADDR and -CONFIG_USB_FASTBOOT_BUF_SIZE. > > > > +buffer and size are set with CONFIG_FASTBOOT_BUF_ADDR and > > > > +CONFIG_FASTBOOT_BUF_SIZE. > > > > > > > > Fastboot partition aliases can also be defined for devices where > > > > GPT limitations prevent user-friendly partition names such as > > > > "boot", "system" diff --git a/drivers/usb/gadget/f_fastboot.c > > > > b/drivers/usb/gadget/f_fastboot.c index 60c846d..ca01a01 100644 > > > > --- a/drivers/usb/gadget/f_fastboot.c > > > > +++ b/drivers/usb/gadget/f_fastboot.c > > > > @@ -380,7 +380,7 @@ static void cb_getvar(struct usb_ep *ep, > > > > struct usb_request *req) !strcmp_l1("max-download-size", cmd)) { > > > > char str_num[12]; > > > > > > > > - sprintf(str_num, "0x%08x", > > > > CONFIG_USB_FASTBOOT_BUF_SIZE); > > > > + sprintf(str_num, "0x%08x", > > > > CONFIG_FASTBOOT_BUF_SIZE); strncat(response, str_num, chars_left); > > > > } else if (!strcmp_l1("serialno", cmd)) { > > > > s = getenv("serial#"); > > > > @@ -430,7 +430,7 @@ static void rx_handler_dl_image(struct usb_ep > > > > *ep, struct usb_request *req) if (buffer_size < transfer_size) > > > > transfer_size = buffer_size; > > > > > > > > - memcpy((void *)CONFIG_USB_FASTBOOT_BUF_ADDR + > > > > download_bytes, > > > > + memcpy((void *)CONFIG_FASTBOOT_BUF_ADDR + download_bytes, > > > > buffer, transfer_size); > > > > > > > > pre_dot_num = download_bytes / BYTES_PER_DOT; > > > > @@ -483,7 +483,7 @@ static void cb_download(struct usb_ep *ep, > > > > struct usb_request *req) > > > > if (0 == download_size) { > > > > sprintf(response, "FAILdata invalid size"); > > > > - } else if (download_size > CONFIG_USB_FASTBOOT_BUF_SIZE) > > > > { > > > > + } else if (download_size > CONFIG_FASTBOOT_BUF_SIZE) { > > > > download_size = 0; > > > > sprintf(response, "FAILdata too large"); > > > > } else { > > > > @@ -544,7 +544,7 @@ static void cb_flash(struct usb_ep *ep, struct > > > > usb_request *req) > > > > strcpy(response, "FAILno flash device defined"); > > > > #ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV > > > > - fb_mmc_flash_write(cmd, (void > > > > *)CONFIG_USB_FASTBOOT_BUF_ADDR, > > > > + fb_mmc_flash_write(cmd, (void *)CONFIG_FASTBOOT_BUF_ADDR, > > > > download_bytes, response); > > > > #endif > > > > fastboot_tx_write_str(response); > > > > diff --git a/include/configs/am335x_evm.h > > > > b/include/configs/am335x_evm.h index 1425b6d..d85a635 100644 > > > > --- a/include/configs/am335x_evm.h > > > > +++ b/include/configs/am335x_evm.h > > > > @@ -301,8 +301,8 @@ > > > > #define CONFIG_USB_FUNCTION_FASTBOOT > > > > #define CONFIG_CMD_FASTBOOT > > > > #define CONFIG_ANDROID_BOOT_IMAGE > > > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > > > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > > > > > > > /* To support eMMC booting */ > > > > #define CONFIG_STORAGE_EMMC > > > > diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h > > > > index 99e3a00..108efaf 100644 > > > > --- a/include/configs/bav335x.h > > > > +++ b/include/configs/bav335x.h > > > > @@ -458,8 +458,8 @@ DEFAULT_LINUX_BOOT_ENV \ > > > > #define CONFIG_USB_FUNCTION_FASTBOOT > > > > #define CONFIG_CMD_FASTBOOT > > > > #define CONFIG_ANDROID_BOOT_IMAGE > > > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > > > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > > > > > > > /* To support eMMC booting */ > > > > #define CONFIG_STORAGE_EMMC > > > > diff --git a/include/configs/bcm28155_ap.h > > > > b/include/configs/bcm28155_ap.h index f023f27..c6ef0d1 100644 > > > > --- a/include/configs/bcm28155_ap.h > > > > +++ b/include/configs/bcm28155_ap.h > > > > @@ -143,8 +143,8 @@ > > > > #define CONFIG_FASTBOOT_FLASH > > > > #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 > > > > #define CONFIG_SYS_CACHELINE_SIZE 64 > > > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE > > > > (CONFIG_SYS_SDRAM_SIZE - SZ_1M) -#define > > > > CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE +#define > > > > CONFIG_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M) +#define > > > > CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE #define > > > > CONFIG_USB_GADGET #define CONFIG_USB_GADGET_DUALSPEED > > > > #define CONFIG_USB_GADGET_VBUS_DRAW 0 > > > > diff --git a/include/configs/dra7xx_evm.h > > > > b/include/configs/dra7xx_evm.h index db15cad..456f3c7 100644 > > > > --- a/include/configs/dra7xx_evm.h > > > > +++ b/include/configs/dra7xx_evm.h > > > > @@ -93,8 +93,8 @@ > > > > #define CONFIG_USB_FUNCTION_FASTBOOT > > > > #define CONFIG_CMD_FASTBOOT > > > > #define CONFIG_ANDROID_BOOT_IMAGE > > > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x2F000000 > > > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x2F000000 > > > > #define CONFIG_FASTBOOT_FLASH > > > > #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 > > > > #endif > > > > diff --git a/include/configs/nitrogen6x.h > > > > b/include/configs/nitrogen6x.h index 191c0dd..d01a75b 100644 > > > > --- a/include/configs/nitrogen6x.h > > > > +++ b/include/configs/nitrogen6x.h > > > > @@ -350,7 +350,7 @@ > > > > #define CONFIG_USB_FUNCTION_FASTBOOT > > > > #define CONFIG_CMD_FASTBOOT > > > > #define CONFIG_ANDROID_BOOT_IMAGE > > > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > > > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > > > > > > > #endif /* __CONFIG_H */ > > > > diff --git a/include/configs/omap3_beagle.h > > > > b/include/configs/omap3_beagle.h index 9089876..4d7f355 100644 > > > > --- a/include/configs/omap3_beagle.h > > > > +++ b/include/configs/omap3_beagle.h > > > > @@ -75,8 +75,8 @@ > > > > #define CONFIG_USB_FUNCTION_FASTBOOT > > > > #define CONFIG_CMD_FASTBOOT > > > > #define CONFIG_ANDROID_BOOT_IMAGE > > > > -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > > -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 > > > > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > > > > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > > > > > > > > /* USB EHCI */ > > > > #define CONFIG_CMD_USB > > > > > > > > > > > > > >
On Friday, July 24, 2015 at 07:24:28 PM, Paul Kocialkowski wrote: > Le jeudi 23 juillet 2015 à 09:15 +0200, Lukasz Majewski a écrit : > > Hi Paul, > > > > > Le lundi 20 juillet 2015 à 14:57 +0200, Lukasz Majewski a écrit : > > > > Hi Paul, > > > > > > > > > FASTBOOT is defined both by CONFIG_USB_FUNCTION_FASTBOOT AND > > > > > CONFIG_CMD_FASTBOOT, so it doesn't make much sense to have a > > > > > CONFIG_USB_FASTBOOT prefix for fastboot-specific options, > > > > > especially given that other config options for fastboot use the > > > > > CONFIG_FASTBOOT prefix. > > > > > > > > > > This replaces the CONFIG_USB_FASTBOOT prefix with CONFIG_FASTBOOT, > > > > > for consistency. > > > > > > > > Applied to u-boot-dfu tree. > > > > > > > > Thanks for your patch! > > > > > > Thanks for merging all those. Perhaps it's time to submit a pull > > > request? I need those patches merged to get some other things > > > accepted. > > > > Could you check if all your posted patches are available in Marek's > > Vasut tree (u-boot-usb)? > > > > It seems like they all are there. > > That's right, but it looks like your tree has some more commits on top. > > Either way, I would be happy with seeing my patches getting merged, > either from Marek's tree or from yours. Hi, what wrong ? Some patches got lost ? What's the problem ? I still didn't send a PR to Tom, waiting for a bit more of a settlement on the USB front. I will do that later today or tomorrow though. Best regards, Marek Vasut
Le vendredi 24 juillet 2015 à 21:54 +0200, Marek Vasut a écrit : > On Friday, July 24, 2015 at 07:24:28 PM, Paul Kocialkowski wrote: > > Le jeudi 23 juillet 2015 à 09:15 +0200, Lukasz Majewski a écrit : > > > Hi Paul, > > > > > > > Le lundi 20 juillet 2015 à 14:57 +0200, Lukasz Majewski a écrit : > > > > > Hi Paul, > > > > > > > > > > > FASTBOOT is defined both by CONFIG_USB_FUNCTION_FASTBOOT AND > > > > > > CONFIG_CMD_FASTBOOT, so it doesn't make much sense to have a > > > > > > CONFIG_USB_FASTBOOT prefix for fastboot-specific options, > > > > > > especially given that other config options for fastboot use the > > > > > > CONFIG_FASTBOOT prefix. > > > > > > > > > > > > This replaces the CONFIG_USB_FASTBOOT prefix with CONFIG_FASTBOOT, > > > > > > for consistency. > > > > > > > > > > Applied to u-boot-dfu tree. > > > > > > > > > > Thanks for your patch! > > > > > > > > Thanks for merging all those. Perhaps it's time to submit a pull > > > > request? I need those patches merged to get some other things > > > > accepted. > > > > > > Could you check if all your posted patches are available in Marek's > > > Vasut tree (u-boot-usb)? > > > > > > It seems like they all are there. > > > > That's right, but it looks like your tree has some more commits on top. > > > > Either way, I would be happy with seeing my patches getting merged, > > either from Marek's tree or from yours. > > Hi, > > what wrong ? Some patches got lost ? What's the problem ? Nothing in particular, I just wish to get those patches merged as soon as posible! > I still didn't send a PR to Tom, waiting for a bit more of a settlement > on the USB front. I will do that later today or tomorrow though. Alright then. Lukasz, anything preventing a PR on your side at this point? Thanks!
Le samedi 25 juillet 2015 à 16:47 +0200, Paul Kocialkowski a écrit : > Le vendredi 24 juillet 2015 à 21:54 +0200, Marek Vasut a écrit : > > On Friday, July 24, 2015 at 07:24:28 PM, Paul Kocialkowski wrote: > > > Le jeudi 23 juillet 2015 à 09:15 +0200, Lukasz Majewski a écrit : > > > > Hi Paul, > > > > > > > > > Le lundi 20 juillet 2015 à 14:57 +0200, Lukasz Majewski a écrit : > > > > > > Hi Paul, > > > > > > > > > > > > > FASTBOOT is defined both by CONFIG_USB_FUNCTION_FASTBOOT AND > > > > > > > CONFIG_CMD_FASTBOOT, so it doesn't make much sense to have a > > > > > > > CONFIG_USB_FASTBOOT prefix for fastboot-specific options, > > > > > > > especially given that other config options for fastboot use the > > > > > > > CONFIG_FASTBOOT prefix. > > > > > > > > > > > > > > This replaces the CONFIG_USB_FASTBOOT prefix with CONFIG_FASTBOOT, > > > > > > > for consistency. > > > > > > > > > > > > Applied to u-boot-dfu tree. > > > > > > > > > > > > Thanks for your patch! > > > > > > > > > > Thanks for merging all those. Perhaps it's time to submit a pull > > > > > request? I need those patches merged to get some other things > > > > > accepted. > > > > > > > > Could you check if all your posted patches are available in Marek's > > > > Vasut tree (u-boot-usb)? > > > > > > > > It seems like they all are there. > > > > > > That's right, but it looks like your tree has some more commits on top. > > > > > > Either way, I would be happy with seeing my patches getting merged, > > > either from Marek's tree or from yours. > > > > Hi, > > > > what wrong ? Some patches got lost ? What's the problem ? > > Nothing in particular, I just wish to get those patches merged as soon > as posible! > > > I still didn't send a PR to Tom, waiting for a bit more of a settlement > > on the USB front. I will do that later today or tomorrow though. > > Alright then. Lukasz, anything preventing a PR on your side at this > point? Oh well, I just saw that Marek has submitted a PR yesterday, thanks!
Le samedi 25 juillet 2015 à 16:47 +0200, Paul Kocialkowski a écrit : > Le vendredi 24 juillet 2015 à 21:54 +0200, Marek Vasut a écrit : > > On Friday, July 24, 2015 at 07:24:28 PM, Paul Kocialkowski wrote: > > > Le jeudi 23 juillet 2015 à 09:15 +0200, Lukasz Majewski a écrit : > > > > Hi Paul, > > > > > > > > > Le lundi 20 juillet 2015 à 14:57 +0200, Lukasz Majewski a écrit : > > > > > > Hi Paul, > > > > > > > > > > > > > FASTBOOT is defined both by CONFIG_USB_FUNCTION_FASTBOOT AND > > > > > > > CONFIG_CMD_FASTBOOT, so it doesn't make much sense to have a > > > > > > > CONFIG_USB_FASTBOOT prefix for fastboot-specific options, > > > > > > > especially given that other config options for fastboot use the > > > > > > > CONFIG_FASTBOOT prefix. > > > > > > > > > > > > > > This replaces the CONFIG_USB_FASTBOOT prefix with CONFIG_FASTBOOT, > > > > > > > for consistency. > > > > > > > > > > > > Applied to u-boot-dfu tree. > > > > > > > > > > > > Thanks for your patch! > > > > > > > > > > Thanks for merging all those. Perhaps it's time to submit a pull > > > > > request? I need those patches merged to get some other things > > > > > accepted. > > > > > > > > Could you check if all your posted patches are available in Marek's > > > > Vasut tree (u-boot-usb)? > > > > > > > > It seems like they all are there. > > > > > > That's right, but it looks like your tree has some more commits on top. > > > > > > Either way, I would be happy with seeing my patches getting merged, > > > either from Marek's tree or from yours. > > > > Hi, > > > > what wrong ? Some patches got lost ? What's the problem ? > > Nothing in particular, I just wish to get those patches merged as soon > as posible! > > > I still didn't send a PR to Tom, waiting for a bit more of a settlement > > on the USB front. I will do that later today or tomorrow though. > > Alright then. Lukasz, anything preventing a PR on your side at this > point? Oh well, I just saw that Marek has submitted a PR yesterday, thanks!
diff --git a/README b/README index f7a55fc..7a131f3 100644 --- a/README +++ b/README @@ -1732,12 +1732,12 @@ The following options need to be configured: This enables support for booting images which use the Android image format header. - CONFIG_USB_FASTBOOT_BUF_ADDR + CONFIG_FASTBOOT_BUF_ADDR The fastboot protocol requires a large memory buffer for downloads. Define this to the starting RAM address to use for downloaded images. - CONFIG_USB_FASTBOOT_BUF_SIZE + CONFIG_FASTBOOT_BUF_SIZE The fastboot protocol requires a large memory buffer for downloads. This buffer should be as large as possible for a platform. Define this to the size available RAM for fastboot. diff --git a/doc/README.android-fastboot b/doc/README.android-fastboot index 92f2897..ce12bc5 100644 --- a/doc/README.android-fastboot +++ b/doc/README.android-fastboot @@ -47,8 +47,8 @@ CONFIG_CMD_FASTBOOT and CONFIG_ANDROID_BOOT_IMAGE. The fastboot protocol requires a large memory buffer for downloads. This buffer should be as large as possible for a platform. The location of the -buffer and size are set with CONFIG_USB_FASTBOOT_BUF_ADDR and -CONFIG_USB_FASTBOOT_BUF_SIZE. +buffer and size are set with CONFIG_FASTBOOT_BUF_ADDR and +CONFIG_FASTBOOT_BUF_SIZE. Fastboot partition aliases can also be defined for devices where GPT limitations prevent user-friendly partition names such as "boot", "system" diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 60c846d..ca01a01 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -380,7 +380,7 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req) !strcmp_l1("max-download-size", cmd)) { char str_num[12]; - sprintf(str_num, "0x%08x", CONFIG_USB_FASTBOOT_BUF_SIZE); + sprintf(str_num, "0x%08x", CONFIG_FASTBOOT_BUF_SIZE); strncat(response, str_num, chars_left); } else if (!strcmp_l1("serialno", cmd)) { s = getenv("serial#"); @@ -430,7 +430,7 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req) if (buffer_size < transfer_size) transfer_size = buffer_size; - memcpy((void *)CONFIG_USB_FASTBOOT_BUF_ADDR + download_bytes, + memcpy((void *)CONFIG_FASTBOOT_BUF_ADDR + download_bytes, buffer, transfer_size); pre_dot_num = download_bytes / BYTES_PER_DOT; @@ -483,7 +483,7 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req) if (0 == download_size) { sprintf(response, "FAILdata invalid size"); - } else if (download_size > CONFIG_USB_FASTBOOT_BUF_SIZE) { + } else if (download_size > CONFIG_FASTBOOT_BUF_SIZE) { download_size = 0; sprintf(response, "FAILdata too large"); } else { @@ -544,7 +544,7 @@ static void cb_flash(struct usb_ep *ep, struct usb_request *req) strcpy(response, "FAILno flash device defined"); #ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV - fb_mmc_flash_write(cmd, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR, + fb_mmc_flash_write(cmd, (void *)CONFIG_FASTBOOT_BUF_ADDR, download_bytes, response); #endif fastboot_tx_write_str(response); diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 1425b6d..d85a635 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -301,8 +301,8 @@ #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 /* To support eMMC booting */ #define CONFIG_STORAGE_EMMC diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 99e3a00..108efaf 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -458,8 +458,8 @@ DEFAULT_LINUX_BOOT_ENV \ #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 /* To support eMMC booting */ #define CONFIG_STORAGE_EMMC diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index f023f27..c6ef0d1 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -143,8 +143,8 @@ #define CONFIG_FASTBOOT_FLASH #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 #define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_USB_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M) -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE +#define CONFIG_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M) +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 0 diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index db15cad..456f3c7 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -93,8 +93,8 @@ #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x2F000000 +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_FASTBOOT_BUF_SIZE 0x2F000000 #define CONFIG_FASTBOOT_FLASH #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 #endif diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 191c0dd..d01a75b 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -350,7 +350,7 @@ #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 9089876..4d7f355 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -75,8 +75,8 @@ #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR -#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 /* USB EHCI */ #define CONFIG_CMD_USB
FASTBOOT is defined both by CONFIG_USB_FUNCTION_FASTBOOT AND CONFIG_CMD_FASTBOOT, so it doesn't make much sense to have a CONFIG_USB_FASTBOOT prefix for fastboot-specific options, especially given that other config options for fastboot use the CONFIG_FASTBOOT prefix. This replaces the CONFIG_USB_FASTBOOT prefix with CONFIG_FASTBOOT, for consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> --- README | 4 ++-- doc/README.android-fastboot | 4 ++-- drivers/usb/gadget/f_fastboot.c | 8 ++++---- include/configs/am335x_evm.h | 4 ++-- include/configs/bav335x.h | 4 ++-- include/configs/bcm28155_ap.h | 4 ++-- include/configs/dra7xx_evm.h | 4 ++-- include/configs/nitrogen6x.h | 4 ++-- include/configs/omap3_beagle.h | 4 ++-- 9 files changed, 20 insertions(+), 20 deletions(-)