Message ID | 1432336346-20290-1-git-send-email-bpoirier@suse.de |
---|---|
State | Accepted, archived |
Delegated to: | David Miller |
Headers | show |
On 5/23/2015 2:12 AM, Benjamin Poirier wrote: > The test in mlx4_load_one() to remove MLX4_FLAG_MSI_X expects mlx4_NOP() to > fail with -EBUSY. It is also necessary to avoid the reset since the device > is not fully reinitialized before calling mlx4_start_hca() a second time. > > Note that this will also affect mlx4_test_interrupts(), the only other user > of MLX4_CMD_NOP. > > Fixes: f5aef5a ("net/mlx4_core: Activate reset flow upon fatal command cases") > Signed-off-by: Benjamin Poirier <bpoirier@suse.de> > --- > drivers/net/ethernet/mellanox/mlx4/cmd.c | 9 +++++++-- > 1 file changed, 7 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c > index 4f7dc04..529ef05 100644 > --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c > +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c > @@ -714,8 +714,13 @@ static int mlx4_cmd_wait(struct mlx4_dev *dev, u64 in_param, u64 *out_param, > msecs_to_jiffies(timeout))) { > mlx4_warn(dev, "command 0x%x timed out (go bit not cleared)\n", > op); > - err = -EIO; > - goto out_reset; > + if (op == MLX4_CMD_NOP) { > + err = -EBUSY; > + goto out; > + } else { > + err = -EIO; > + goto out_reset; > + } > } > > err = context->result; > It looks fine, a private case that should not trigger the reset flow. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index 4f7dc04..529ef05 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -714,8 +714,13 @@ static int mlx4_cmd_wait(struct mlx4_dev *dev, u64 in_param, u64 *out_param, msecs_to_jiffies(timeout))) { mlx4_warn(dev, "command 0x%x timed out (go bit not cleared)\n", op); - err = -EIO; - goto out_reset; + if (op == MLX4_CMD_NOP) { + err = -EBUSY; + goto out; + } else { + err = -EIO; + goto out_reset; + } } err = context->result;
The test in mlx4_load_one() to remove MLX4_FLAG_MSI_X expects mlx4_NOP() to fail with -EBUSY. It is also necessary to avoid the reset since the device is not fully reinitialized before calling mlx4_start_hca() a second time. Note that this will also affect mlx4_test_interrupts(), the only other user of MLX4_CMD_NOP. Fixes: f5aef5a ("net/mlx4_core: Activate reset flow upon fatal command cases") Signed-off-by: Benjamin Poirier <bpoirier@suse.de> --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)