| Message ID | yq1wq04kcso.fsf@sermon.lab.mkp.net |
|---|---|
| State | Not Applicable |
| Delegated to: | David Miller |
| Headers | show |
Hello, On (05/19/15 07:49), Martin K. Petersen wrote: > Does the patch below help? I think it should, I'll test it. > Also, please let us know which drive you have and send us the output of: > > # smartctl -l gplog,0x13 /dev/sdN > hm... sudo smartctl -l gplog,0x13 /dev/sda1 smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.1.0-rc3-dbg-00347-g0a60060-dirty] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org General Purpose Log 0x13 does not exist (override with '-T permissive' option) fwiw, I did `dmesg | grep -i ata` [ 0.472463] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x10 impl SATA mode [ 0.476304] ata1: DUMMY [ 0.476391] ata2: DUMMY [ 0.476478] ata3: DUMMY [ 0.476565] ata4: DUMMY [ 0.476654] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 30 [ 0.795403] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.798156] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 0.798160] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 0.798290] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.798696] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 0.798699] ata5.00: ATA-9: SAMSUNG MZMTE256HMHP-000, EXT49K0Q, max UDMA/133 [ 0.798821] ata5.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.799576] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 0.799581] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 0.799705] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 0.800109] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 0.800115] ata5.00: configured for UDMA/133 [ 0.800753] scsi 4:0:0:0: Direct-Access ATA SAMSUNG MZMTE256 9K0Q PQ: 0 ANSI: 5 it's a SAMSUNG MZMTE256 9K0Q. -ss > > diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c > index 2893563d0537..2b370ee0ae86 100644 > --- a/drivers/ata/libata-eh.c > +++ b/drivers/ata/libata-eh.c > @@ -1521,6 +1521,7 @@ retry: > } else { > tf.command = ATA_CMD_READ_LOG_EXT; > tf.protocol = ATA_PROT_PIO; > + dma = false; > } > tf.lbal = log; > tf.lbam = page; > > -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On (05/19/15 07:49), Martin K. Petersen wrote: > Sergey> Hello, my laptop doesn't boot anymore, spinning in "READ LOG DMA > Sergey> EXT failed, trying unqueued". any reason it loops forever? > > Does the patch below help? > it does. Reported-and-tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> -ss > Also, please let us know which drive you have and send us the output of: > > # smartctl -l gplog,0x13 /dev/sdN > > Thanks! > > -- > Martin K. Petersen Oracle Linux Engineering > > > diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c > index 2893563d0537..2b370ee0ae86 100644 > --- a/drivers/ata/libata-eh.c > +++ b/drivers/ata/libata-eh.c > @@ -1521,6 +1521,7 @@ retry: > } else { > tf.command = ATA_CMD_READ_LOG_EXT; > tf.protocol = ATA_PROT_PIO; > + dma = false; > } > tf.lbal = log; > tf.lbam = page; > > -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 2893563d0537..2b370ee0ae86 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1521,6 +1521,7 @@ retry: } else { tf.command = ATA_CMD_READ_LOG_EXT; tf.protocol = ATA_PROT_PIO; + dma = false; } tf.lbal = log; tf.lbam = page;
>>>>> "Sergey" == Sergey Senozhatsky <sergey.senozhatsky@gmail.com> writes: Sergey> Hello, my laptop doesn't boot anymore, spinning in "READ LOG DMA Sergey> EXT failed, trying unqueued". any reason it loops forever? Does the patch below help? Also, please let us know which drive you have and send us the output of: # smartctl -l gplog,0x13 /dev/sdN Thanks!