Message ID | 73eb78d846c220d223f68a3b29f42eff011795fd.1430498637.git.jtoppins@cumulusnetworks.com |
---|---|
State | Changes Requested, archived |
Delegated to: | David Miller |
Headers | show |
On Fri, May 1, 2015 at 10:24 AM, Jonathan Toppins <jtoppins@cumulusnetworks.com> wrote: > From: Andy Gospodarek <gospo@cumulusnetworks.com> > > Adds netlink support for the following bonding options: > * BOND_OPT_AD_ACTOR_SYS_PRIO > * BOND_OPT_AD_ACTOR_SYSTEM > * BOND_OPT_AD_USER_PORT_KEY > > When setting the actor system mac address we assume the netlink message > contains a binary mac and not a string representation of a mac. > > Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> > [jt: completed the setting side of the netlink attributes] > Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> > --- > drivers/net/bonding/bond_netlink.c | 50 ++++++++++++++++++++++++++++++++++++ > include/uapi/linux/if_link.h | 3 +++ > 2 files changed, 53 insertions(+) > > diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c > index 7b11243..d98f770 100644 > --- a/drivers/net/bonding/bond_netlink.c > +++ b/drivers/net/bonding/bond_netlink.c > @@ -94,6 +94,10 @@ static const struct nla_policy bond_policy[IFLA_BOND_MAX + 1] = { > [IFLA_BOND_AD_LACP_RATE] = { .type = NLA_U8 }, > [IFLA_BOND_AD_SELECT] = { .type = NLA_U8 }, > [IFLA_BOND_AD_INFO] = { .type = NLA_NESTED }, > + [IFLA_BOND_AD_ACTOR_SYS_PRIO] = { .type = NLA_U16 }, > + [IFLA_BOND_AD_USER_PORT_KEY] = { .type = NLA_U16 }, > + [IFLA_BOND_AD_ACTOR_SYSTEM] = { .type = NLA_BINARY, > + .len = MAX_ADDR_LEN }, > }; > > static const struct nla_policy bond_slave_policy[IFLA_BOND_SLAVE_MAX + 1] = { > @@ -379,6 +383,36 @@ static int bond_changelink(struct net_device *bond_dev, > if (err) > return err; > } > + if (data[IFLA_BOND_AD_ACTOR_SYS_PRIO]) { > + int actor_sys_prio = > + nla_get_u16(data[IFLA_BOND_AD_ACTOR_SYS_PRIO]); > + > + bond_opt_initval(&newval, actor_sys_prio); > + err = __bond_opt_set(bond, BOND_OPT_AD_ACTOR_SYS_PRIO, &newval); > + if (err) > + return err; > + } > + > + if (data[IFLA_BOND_AD_USER_PORT_KEY]) { > + int port_key = > + nla_get_u16(data[IFLA_BOND_AD_USER_PORT_KEY]); > + > + bond_opt_initval(&newval, port_key); > + err = __bond_opt_set(bond, BOND_OPT_AD_USER_PORT_KEY, &newval); > + if (err) > + return err; > + } > + > + if (data[IFLA_BOND_AD_ACTOR_SYSTEM]) { > + if (nla_len(data[IFLA_BOND_AD_ACTOR_SYSTEM]) != ETH_ALEN) > + return -EINVAL; > + > + bond_opt_initstr(&newval, > + nla_data(data[IFLA_BOND_AD_ACTOR_SYSTEM])); > + err = __bond_opt_set(bond, BOND_OPT_AD_ACTOR_SYSTEM, &newval); > + if (err) > + return err; > + } > return 0; > } > > @@ -426,6 +460,9 @@ static size_t bond_get_size(const struct net_device *bond_dev) > nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_INFO_ACTOR_KEY */ > nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_INFO_PARTNER_KEY*/ > nla_total_size(ETH_ALEN) + /* IFLA_BOND_AD_INFO_PARTNER_MAC*/ > + nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_ACTOR_SYS_PRIO */ > + nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_USER_PORT_KEY */ > + nla_total_size(ETH_ALEN) + /* IFLA_BOND_AD_ACTOR_SYSTEM */ > 0; > } > > @@ -548,6 +585,19 @@ static int bond_fill_info(struct sk_buff *skb, > bond->params.ad_select)) > goto nla_put_failure; > > + if (nla_put_u16(skb, IFLA_BOND_AD_ACTOR_SYS_PRIO, > + bond->params.ad_actor_sys_prio)) > + goto nla_put_failure; > + > + if (nla_put_u16(skb, IFLA_BOND_AD_USER_PORT_KEY, > + bond->params.ad_user_port_key)) > + goto nla_put_failure; > + > + if (nla_put(skb, IFLA_BOND_AD_ACTOR_SYSTEM, > + sizeof(bond->params.ad_actor_system), > + &bond->params.ad_actor_system)) > + goto nla_put_failure; > + I think this does not make sense for MODE != 8023AD. Shouldn't this be inside next block which is for the 802.3ad mode? > if (BOND_MODE(bond) == BOND_MODE_8023AD) { > struct ad_info info; > > diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h > index d9cd192..6d6e502 100644 > --- a/include/uapi/linux/if_link.h > +++ b/include/uapi/linux/if_link.h > @@ -417,6 +417,9 @@ enum { > IFLA_BOND_AD_LACP_RATE, > IFLA_BOND_AD_SELECT, > IFLA_BOND_AD_INFO, > + IFLA_BOND_AD_ACTOR_SYS_PRIO, > + IFLA_BOND_AD_USER_PORT_KEY, > + IFLA_BOND_AD_ACTOR_SYSTEM, Even though this is available / stored in bond->param, I feel that these belong to IFLA_BOND_AD_INFO_, no? > __IFLA_BOND_MAX, > }; > > -- > 1.7.10.4 > > -- > To unsubscribe from this list: send the line "unsubscribe netdev" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 5/1/15 7:15 PM, Mahesh Bandewar wrote: >> >> @@ -548,6 +585,19 @@ static int bond_fill_info(struct sk_buff *skb, >> bond->params.ad_select)) >> goto nla_put_failure; >> >> + if (nla_put_u16(skb, IFLA_BOND_AD_ACTOR_SYS_PRIO, >> + bond->params.ad_actor_sys_prio)) >> + goto nla_put_failure; >> + >> + if (nla_put_u16(skb, IFLA_BOND_AD_USER_PORT_KEY, >> + bond->params.ad_user_port_key)) >> + goto nla_put_failure; >> + >> + if (nla_put(skb, IFLA_BOND_AD_ACTOR_SYSTEM, >> + sizeof(bond->params.ad_actor_system), >> + &bond->params.ad_actor_system)) >> + goto nla_put_failure; >> + > I think this does not make sense for MODE != 8023AD. Shouldn't this be > inside next block which is for the 802.3ad mode? > >> if (BOND_MODE(bond) == BOND_MODE_8023AD) { >> struct ad_info info; >> >> diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h >> index d9cd192..6d6e502 100644 >> --- a/include/uapi/linux/if_link.h >> +++ b/include/uapi/linux/if_link.h >> @@ -417,6 +417,9 @@ enum { >> IFLA_BOND_AD_LACP_RATE, >> IFLA_BOND_AD_SELECT, >> IFLA_BOND_AD_INFO, >> + IFLA_BOND_AD_ACTOR_SYS_PRIO, >> + IFLA_BOND_AD_USER_PORT_KEY, >> + IFLA_BOND_AD_ACTOR_SYSTEM, > Even though this is available / stored in bond->param, I feel that > these belong to IFLA_BOND_AD_INFO_, no? Can see it fitting in there. Not sure of the history of the AD_INFO_* object. Evaluating implementation, will respond tomorrow with conclusion. > >> __IFLA_BOND_MAX, >> }; >> >> -- >> 1.7.10.4 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe netdev" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 5/4/15 4:48 PM, Jonathan Toppins wrote: > On 5/1/15 7:15 PM, Mahesh Bandewar wrote: >>> >>> @@ -548,6 +585,19 @@ static int bond_fill_info(struct sk_buff *skb, >>> bond->params.ad_select)) >>> goto nla_put_failure; >>> >>> + if (nla_put_u16(skb, IFLA_BOND_AD_ACTOR_SYS_PRIO, >>> + bond->params.ad_actor_sys_prio)) >>> + goto nla_put_failure; >>> + >>> + if (nla_put_u16(skb, IFLA_BOND_AD_USER_PORT_KEY, >>> + bond->params.ad_user_port_key)) >>> + goto nla_put_failure; >>> + >>> + if (nla_put(skb, IFLA_BOND_AD_ACTOR_SYSTEM, >>> + sizeof(bond->params.ad_actor_system), >>> + &bond->params.ad_actor_system)) >>> + goto nla_put_failure; >>> + >> I think this does not make sense for MODE != 8023AD. Shouldn't this be >> inside next block which is for the 802.3ad mode? Agreed, the kernel should filter attributes not useful for that mode. Will move the sending of these attributes to be inside the mode check below. >> >>> if (BOND_MODE(bond) == BOND_MODE_8023AD) { >>> struct ad_info info; >>> >>> diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h >>> index d9cd192..6d6e502 100644 >>> --- a/include/uapi/linux/if_link.h >>> +++ b/include/uapi/linux/if_link.h >>> @@ -417,6 +417,9 @@ enum { >>> IFLA_BOND_AD_LACP_RATE, >>> IFLA_BOND_AD_SELECT, >>> IFLA_BOND_AD_INFO, >>> + IFLA_BOND_AD_ACTOR_SYS_PRIO, >>> + IFLA_BOND_AD_USER_PORT_KEY, >>> + IFLA_BOND_AD_ACTOR_SYSTEM, >> Even though this is available / stored in bond->param, I feel that >> these belong to IFLA_BOND_AD_INFO_, no? > > Can see it fitting in there. Not sure of the history of the AD_INFO_* > object. Evaluating implementation, will respond tomorrow with conclusion. So I did complete a rough implementation of this in both the kernel and iproute2 [1][2]. After having implemented the example code it became clear that we should continue to divide based on write permissions. That being all current bonding attributes that are writable exist in "IFLA_BOND_*" and all "IFLA_BOND_AD_INFO*" attributes are read-only. By dividing this way it makes consumers of the API (f.e. iprotue2) pretty straight forward to implement in both the write and read cases. Also all IFLA_BOND_AD_INFO attributes I do not see getting converted to writable, as they are generated as a result of lacp negotiation with input from these new ad_ attributes, agree? In the implementation code for iproute2 [2] a "submode" for defining ad_info attributes was needed to keep the parsing simple. This felt awkward because all other attributes just need to be listed, with no special submode beyond the link type. Summary, will send a v2 with the current implementation and change bond_fill_info() to only send these new ad attributes if the bond is in mode 4, will not modify lacp_rate or ad_select at this time. Will post v2 tomorrow if no strong disagreements. Thanks! [1] https://github.com/jtoppins/net-next/tree/ad_actor-patches-v2 [2] https://github.com/jtoppins/iproute2/tree/ad_actor-patches-v2 > >> >>> __IFLA_BOND_MAX, >>> }; >>> >>> -- >>> 1.7.10.4 >>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe netdev" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, May 5, 2015 at 6:07 PM, Jonathan Toppins <jtoppins@cumulusnetworks.com> wrote: > On 5/4/15 4:48 PM, Jonathan Toppins wrote: >> >> On 5/1/15 7:15 PM, Mahesh Bandewar wrote: >>>> >>>> >>>> @@ -548,6 +585,19 @@ static int bond_fill_info(struct sk_buff *skb, >>>> bond->params.ad_select)) >>>> goto nla_put_failure; >>>> >>>> + if (nla_put_u16(skb, IFLA_BOND_AD_ACTOR_SYS_PRIO, >>>> + bond->params.ad_actor_sys_prio)) >>>> + goto nla_put_failure; >>>> + >>>> + if (nla_put_u16(skb, IFLA_BOND_AD_USER_PORT_KEY, >>>> + bond->params.ad_user_port_key)) >>>> + goto nla_put_failure; >>>> + >>>> + if (nla_put(skb, IFLA_BOND_AD_ACTOR_SYSTEM, >>>> + sizeof(bond->params.ad_actor_system), >>>> + &bond->params.ad_actor_system)) >>>> + goto nla_put_failure; >>>> + >>> >>> I think this does not make sense for MODE != 8023AD. Shouldn't this be >>> inside next block which is for the 802.3ad mode? > > > Agreed, the kernel should filter attributes not useful for that mode. Will > move the sending of these attributes to be inside the mode check below. > >>> >>>> if (BOND_MODE(bond) == BOND_MODE_8023AD) { >>>> struct ad_info info; >>>> >>>> diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h >>>> index d9cd192..6d6e502 100644 >>>> --- a/include/uapi/linux/if_link.h >>>> +++ b/include/uapi/linux/if_link.h >>>> @@ -417,6 +417,9 @@ enum { >>>> IFLA_BOND_AD_LACP_RATE, >>>> IFLA_BOND_AD_SELECT, >>>> IFLA_BOND_AD_INFO, >>>> + IFLA_BOND_AD_ACTOR_SYS_PRIO, >>>> + IFLA_BOND_AD_USER_PORT_KEY, >>>> + IFLA_BOND_AD_ACTOR_SYSTEM, >>> >>> Even though this is available / stored in bond->param, I feel that >>> these belong to IFLA_BOND_AD_INFO_, no? >> >> >> Can see it fitting in there. Not sure of the history of the AD_INFO_* >> object. Evaluating implementation, will respond tomorrow with conclusion. > > > So I did complete a rough implementation of this in both the kernel and > iproute2 [1][2]. > > After having implemented the example code it became clear that we should > continue to divide based on write permissions. That being all current > bonding attributes that are writable exist in "IFLA_BOND_*" and all > "IFLA_BOND_AD_INFO*" attributes are read-only. By dividing this way it makes > consumers of the API (f.e. iprotue2) pretty straight forward to implement in > both the write and read cases. Also all IFLA_BOND_AD_INFO attributes I do > not see getting converted to writable, as they are generated as a result of > lacp negotiation with input from these new ad_ attributes, agree? > So far what we had was only LACP negotiated values but now that we have variables that we are setting and are used for LACP negotiations makes it little different. I'm fine if the overall command structure makes sense and the read-values are kept separate from write-values as you have mentioned and is easier to parse. > In the implementation code for iproute2 [2] a "submode" for defining ad_info > attributes was needed to keep the parsing simple. This felt awkward because > all other attributes just need to be listed, with no special submode beyond > the link type. > > Summary, will send a v2 with the current implementation and change > bond_fill_info() to only send these new ad attributes if the bond is in mode > 4, will not modify lacp_rate or ad_select at this time. Will post v2 > tomorrow if no strong disagreements. > > Thanks! > > [1] https://github.com/jtoppins/net-next/tree/ad_actor-patches-v2 > [2] https://github.com/jtoppins/iproute2/tree/ad_actor-patches-v2 > >> >>> >>>> __IFLA_BOND_MAX, >>>> }; >>>> >>>> -- >>>> 1.7.10.4 >>>> >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe netdev" in >>>> the body of a message to majordomo@vger.kernel.org >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> > -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c index 7b11243..d98f770 100644 --- a/drivers/net/bonding/bond_netlink.c +++ b/drivers/net/bonding/bond_netlink.c @@ -94,6 +94,10 @@ static const struct nla_policy bond_policy[IFLA_BOND_MAX + 1] = { [IFLA_BOND_AD_LACP_RATE] = { .type = NLA_U8 }, [IFLA_BOND_AD_SELECT] = { .type = NLA_U8 }, [IFLA_BOND_AD_INFO] = { .type = NLA_NESTED }, + [IFLA_BOND_AD_ACTOR_SYS_PRIO] = { .type = NLA_U16 }, + [IFLA_BOND_AD_USER_PORT_KEY] = { .type = NLA_U16 }, + [IFLA_BOND_AD_ACTOR_SYSTEM] = { .type = NLA_BINARY, + .len = MAX_ADDR_LEN }, }; static const struct nla_policy bond_slave_policy[IFLA_BOND_SLAVE_MAX + 1] = { @@ -379,6 +383,36 @@ static int bond_changelink(struct net_device *bond_dev, if (err) return err; } + if (data[IFLA_BOND_AD_ACTOR_SYS_PRIO]) { + int actor_sys_prio = + nla_get_u16(data[IFLA_BOND_AD_ACTOR_SYS_PRIO]); + + bond_opt_initval(&newval, actor_sys_prio); + err = __bond_opt_set(bond, BOND_OPT_AD_ACTOR_SYS_PRIO, &newval); + if (err) + return err; + } + + if (data[IFLA_BOND_AD_USER_PORT_KEY]) { + int port_key = + nla_get_u16(data[IFLA_BOND_AD_USER_PORT_KEY]); + + bond_opt_initval(&newval, port_key); + err = __bond_opt_set(bond, BOND_OPT_AD_USER_PORT_KEY, &newval); + if (err) + return err; + } + + if (data[IFLA_BOND_AD_ACTOR_SYSTEM]) { + if (nla_len(data[IFLA_BOND_AD_ACTOR_SYSTEM]) != ETH_ALEN) + return -EINVAL; + + bond_opt_initstr(&newval, + nla_data(data[IFLA_BOND_AD_ACTOR_SYSTEM])); + err = __bond_opt_set(bond, BOND_OPT_AD_ACTOR_SYSTEM, &newval); + if (err) + return err; + } return 0; } @@ -426,6 +460,9 @@ static size_t bond_get_size(const struct net_device *bond_dev) nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_INFO_ACTOR_KEY */ nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_INFO_PARTNER_KEY*/ nla_total_size(ETH_ALEN) + /* IFLA_BOND_AD_INFO_PARTNER_MAC*/ + nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_ACTOR_SYS_PRIO */ + nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_USER_PORT_KEY */ + nla_total_size(ETH_ALEN) + /* IFLA_BOND_AD_ACTOR_SYSTEM */ 0; } @@ -548,6 +585,19 @@ static int bond_fill_info(struct sk_buff *skb, bond->params.ad_select)) goto nla_put_failure; + if (nla_put_u16(skb, IFLA_BOND_AD_ACTOR_SYS_PRIO, + bond->params.ad_actor_sys_prio)) + goto nla_put_failure; + + if (nla_put_u16(skb, IFLA_BOND_AD_USER_PORT_KEY, + bond->params.ad_user_port_key)) + goto nla_put_failure; + + if (nla_put(skb, IFLA_BOND_AD_ACTOR_SYSTEM, + sizeof(bond->params.ad_actor_system), + &bond->params.ad_actor_system)) + goto nla_put_failure; + if (BOND_MODE(bond) == BOND_MODE_8023AD) { struct ad_info info; diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index d9cd192..6d6e502 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -417,6 +417,9 @@ enum { IFLA_BOND_AD_LACP_RATE, IFLA_BOND_AD_SELECT, IFLA_BOND_AD_INFO, + IFLA_BOND_AD_ACTOR_SYS_PRIO, + IFLA_BOND_AD_USER_PORT_KEY, + IFLA_BOND_AD_ACTOR_SYSTEM, __IFLA_BOND_MAX, };